Primary Arms has special deals this week Use the promotion code "END" where applicable to lock in your savings!
Bravo Company / Vltor 7.62mm 308 Mod 3 Charging Handle

Bravo Company / Vltor 7.62mm 308 Mod 3 Charging Handle

Manufactured by Bravo Company / Vltor
BCMGFH762M3

Bravo Company Manufacturing AR-308 Charging Handle - Mod 3

In Stock
$52.15

Description and Specifications

The BCMGUNFIGHTER Charging Handle and extended latches feature internal redesigns to direct the force off of the roll pin and into the body of the charging handle during support hand only manipulations. This new design has a built in backstop engineered into the extended latch and into the charging handle. As the latch is opened up, its travel is limited by these flat surface backstops. With this travel limiting feature, the stress is taken off the roll pin, and is now redirected into the entire body of the charging handle. The BCMGUNFIGHTER Charging Handle offers two significant advantages. 1. Since the tiny roll pin is no longer the weak point - it is an stronger system and tactical latch will stay intact even under repeated support side only manipulation. 2. With the force kept inside the body of the handle, when the handle is pulled directly to the rear, it moves directly to the rear and does not angle off to the outboard side. A much smoother operation. Not compatible with RRA, Sig 716, or Armalite AR-10 7.62/.308.
Brand
Bravo Company Manufacturing
Finish
Hardcoat Anodized - Black
Material
7075-T6
Platform
AR-308 - DPMS
Ambidextrous
No

Reviews

Review Summary
(Based on 18 Reviews)

Overall Rating: 5.0 / 5.0

Reviews

Fits aero m5
Ray from CA wrote on May 29, 2016:

I bought this knowing it may need to be modified to fit my aero m5 upper. I didn't mind since I use BCM in most my rifles. Once I recievied it I did a dry fit to see where I need to file it for clearance. I was really surprised that it fit perfectly. No modifications needed. I can say that the mod 3 latch maybe a little obstructive on an ar15, but for the larger 308 upper receiver it was a perfect match. I'm glade I went with the mod 3. Absolutely a 5 star product.

Didn't Fit my Aero M5 Lower
Dan from CA wrote on December 14, 2015:

So BCM charging handles are great, bought it to put on my complete Aero M5 upper and lower but it doesn't clear the Aero lower (needs to be Dremeled to allow the bolt to go all the way forward) kind of disappointed that it didn't fit right off hand

Charging handle
Awesome gunner from N/A wrote on August 10, 2015:

Very nice over original dpms stock charging handle .Shipping fast had it in 2 days even tho I went with the cheapest usps high wait shipping.i don't have any other charging handles to compare but I see they are almost double the expense .

Perfect Fit in Ruger SR-762!
The TRUST from N/A wrote on August 10, 2015:

Perfect Fit in Ruger SR-762! Works WAAAAAAAAAAAAAAY better than the stock charging handle.

Solid product
Clayton from AZ wrote on August 10, 2015:

Always fantastic quality from BCM.

Finally... A BCM 7.62 Gunfighter...
Browncoat from LA wrote on August 10, 2015:

I haven't done nearly as much business dealing with guns and such as I would like but I have learned to trust quality products. If you can't afford what you want... wait until you can. There are some things you just shouldn't settle on. Bravo Company, from my limited experience and posts/blogs/reviews I've read is one of the companies that are consistent with quality. And it may not seem like a lot to some, but the list price for a BCM charging handle was more than I was willing to pay for. But leave it to Primary Arms to put them on sale and help me score one... finally. It hadn't been a 'need' since my primary optic has been a 'shortish' Millet 1x4 DMS scope, but when I bought my longer optic, a wider charger became a 'need'. And the Mod 3 fills the 'need' nicely. Easily racks with one hand and certainly adds to the 'tactical' appearance which most of us love, even if we won't admit it. Now if I can ever get around to scoring an AAC muzzle device and a mating suppressor...

Just what I needed for my big baby!
Jim Richard from N/A wrote on August 10, 2015:

The stock charging handle that comes with pretty much every AR, in this case my new Remington R-25, is just too small and hard to get a good grip on. This is especially true if your scope extends over the handle! The solution was this outstanding model that allows me to easily pull on. This is one of those must-have upgrades. Get it! Oh, and Primary Arms is THE BEST! I am so proud to be able to shop at a Texas dealer (which is relatively close to my home). They are always willing to help and ship fast as lightening.

Bravo Company / Vltor 7.62mm 308 Mod 3 Charging Ha
Andrew C. from TX wrote on August 10, 2015:

Works as advertised. Strong, nice smooth finish. Fit perfectly and looks great.

Best Charging Handle Out There!!!
Matt from FL wrote on August 10, 2015:

This is my second charging handle from BCM. I bought this for a 308 build and love it.

Bravo company vltor charging handle
c biser from CA wrote on August 10, 2015:

Just enough side extension to miss d-45 sights but not get hung up in the case

Superb!
N/A from NY wrote on August 10, 2015:

Excellent product! Replaced stock charging handle on my DPMS LR308. Absolutely solid and 100% smoother action now As always fast shipping at great price from Primaryarms!

Awesome Addition!
Nicholas Godwin from N/A wrote on August 10, 2015:

308 AR with a large scope made it hard to cycle the charging handle. Not anymore, the large latch makes it easy to reach now. Great job by Primary Arms getting it out, USPS "lost" it for five days. Fed-Ex or UPS only from now on.

great
Robert monk from N/A wrote on August 10, 2015:

thats all i can say

Great product, great price!
Will S. from N/A wrote on August 10, 2015:

Recently got this charging handle on sale. Makes charging my DPMS pattern .308 a breeze even while wearing gloves. Also works well as a gas deflector if running a suppressor. As always the fastest shipping from Primary Arms.

Great Charging Handle.
Steven Pyle from TX wrote on August 10, 2015:

Sturdy, well made charging handle. Plenty of room to grab handle under my scope. Makes charging the weapon much smoother than the flimsy stock CH.

7.62 BC Charging handle
Roy Selensky from N/A wrote on August 10, 2015:

Great group of guys to deal with. Very knowledgeable and helpful. Placed my order and received it within a couple of days. Will do business with them again.

Just drop it in and go.
Rod Chatfield from CA wrote on August 10, 2015:

Easy install, just swap it out with your current charging handle and you are good to go.

Vltor 7.62 Mod 3 Charging Handle
William Wilson from NM wrote on July 31, 2015:

One of the best general purpose charging handles around. Fit and finish are always top notch. Never have had an issue.