Odin Works AR-10 M-LOK Handguard DPMS Low - 15.5"
Details
Details
The .308 M-LOK Handguard offers one of the lightest weight freefloat solutions on the market, without sacrificing strength or structural integrity. This rail features ODIN boomerang cuts offering lightweight style in a format that takes advantage of the M-LOK mounting system for a highly customizable build.
NOTE: Compatible with DPMS low profile upper receivers (2.00").
Features:
- DPMS low profile
- Freefloat handguard
- 6005-T651 aluminum
- Engineered with advanced ergonomics
- Uninterrupted Picatinny top rail
- QD sling mount positions at 3 and 9-o'clock
- Adjusts in 1/2 slot increments for precise accessory placement
- No access to back side of the rail is required
- Accessories can mount with either end facing forward
- Forend adapter threading: 1 7/16-16
- Inside diameter: 1.75"
- Outside diameter: Width: 1.95" Height: 2.23"
- Includes barrel nut
Specifications
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.Ratings & Reviews
9 reviews
Good product. Good customer service.
by Tyler
Initially ordered the wrong product and these guys took care of me. 3 days after they helped me confirm I needed LOW instead of HIGH, I'm holding the correct adapter and could not be more satisfied with the product or the customer service.
Still Searching for a Good .308 Rail
by T -
Disappointed again! When the screws are tightened, the rail cants to the right. I tried tightening the screws in different sequences but it still cants to the right. I have had this same problem with every rail of this design. I think the problem is inherit to the rails that attache this way.
I wish YHM made .308 rails. Their rails thread on to the barrel nut and they always line up straight. I had a Fortis Switch rail that didn't cant but it was the wrong height.
Also, this Odin rail is slightly taller than the receiver. I don't think it is enough to cause a problem with the back up sights but it is noticeable. However, the rail canting to the right, is definitely enough to cause the back up sights to be out of wack! Not to mention, it looks like poop!
Poor Quality Control
by Alex -
Product arrived with tooling marks which were painted over. You guys need to poke-yoke your process. This part may have passed the Odin works Quality control but it didn't pass mine. I haven't mounted it because I'm asking for a refund.
Incredible fit and craftsmanship!
by Heath Allen -
Hands down one of the best rails I have ever purchased. The fit was flawless, and the craftsmanship was what we have come to expect from Odin. Incredible!
Nice quality
by Alber -
It is good
Odin works 15.5 DPMS low Handguard
by Justin -
If you are wanting something to match up to a PSA upper receiver then this is the one. The fit is perfect and it's level with the upper receiver. I don't understand the bad review for this Handguard, because if you use the line up pin sent with the hand guard then everything fits perfectly. I have looked everywhere for a Handguard that would mate up to a PSA receiver and this one does.
Odin Works 15.5 DPMS low handguard
by J Tanner
I put this on my PSA upper and it is a perfect fit. I have searched high and low for a handguard that would match up to the PSA receiver. This one does. Excellent fit and finish. I don't know why it's getting bad reviews for not lining up correctly, because they supply a line up pin to use to line it up correctly.
Odin 15.5 low
by J Tanner
If you are looking for a Handguard that will match up to the PSA upper receivers then this is the one. I have looked everywhere for one that would. The fit and finish is excellent. I don't understand the bad review for this Handguard, because if you use the line up pin sent with the Handguard then it will line up just fine.
Looks good
by Kyle -
Very thorough instructions and good quality overall. I am NOT fond of the vibratite thread locker that comes with it. Recommended using it in barrel nut adapter and handguard screws. Use sparingly if you do! The aluminum barrel nut adapter is a weak point in this set up and is prone to strip when installing the handguard screws if you don't use extreme caution. I had one screw strip and ordered a replacement adapter from Odin. The review on their sight mentioned it being a weak link also