Quantcast

Join Our Mailing List

Review Us!

Review Us

Follow Us!

facebook google plus twitter PrimaryArms LLC YouTube Channel flickr
 
You are here:Home > TOOLS
Sort By:
Page of 2
Primary Arms Flecktarn Stencil - PAFS Magpul AR-15 BEV Block Geissele Reaction Rod for AR-15 Uppers NCSTAR AR15/M16 Combo Wrench Tool

Our Price:
$19.99
In Stock
(4)

Our Price:
$49.95
In Stock
(33)

Our Price: $99.00
Sale Price: $79.20
You save $19.80!
In Stock
(31)

Our Price:
$24.99
In Stock
(71)
Primary Arms Fleck Stencil - PAFS Magpul AR-15 BEV Block - MAG536 Geissele Reaction Rod for AR-15 Uppers basic ar15 combo tool
  • Primary Arms Fleck Stencil - Making the black rifle disappear!

    • Flecktrarn pattern
    • Solvent proof
    • Heavy silicone construction
    • Flexible for any surface
    • Convenient and easy to use
    • Reusable
    • Skill level: beginner to advanced
    • 7.5"X10"
The Magpul BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR assembly of the uppers and lowers!
  • Prevents damage to upper receivers caused by vice blocks
  • Precision machined of 4140 Chrome Moly Steel
  • Perfect for installation and maintenance
This multi-purpose tool combines all of the necessary tools to eliminate the need of owning multiple wrench types.  Use it for all of your M16 or AR-15 style rifles.
Combat Optics Tool NcStar 2nd Generation AR Combo Armorer's Wrench Tool Tapco AR-15/M4 ARMORERS MULTI-TOOL TINTOOL905 Magpul AR-15 Armorers Wrench

Our Price:
$14.99
In Stock
(5)

Our Price:
$24.99
In Stock
(42)

Our Price:
$39.99
In Stock
(18)

Our Price: $79.95
Sale Price: $59.99
You save $19.96!
In Stock
(14)
Combat Optics Tool NcStar 2nd Generation AR Combo Armorer's Wrench Tool TARW2 Tapco AR-15/M4 ARMORERS MULTI-TOOL TINTOOL905 Magpul AR-15 Armorers Wrench - MAG535
A tool to add to your cleaning or maintenance kit. The Combat Optic Tool will adjust windage and elevation on Primary Arms, Aimpoint, Aimpoint T1, EOTech, Trijicon ACOGs, RMRs and other optics. The box wrench will service both 10mm Aimpoint mounts and LaRue Tactical 3/8″ mounts. It will also work on EOTech, Trijicon mounts, ADM and GDI mounts. Plus a bottle opener.
This is the AR15 Multi-Function Armorer's Wrench that all Armorers, Gunsmiths and Hobbyists wish they had in their tool kit! It even contains a 1911 Barrel Bushing Wrench and a tactical bottle cap opener. Tapco Enhanced AR-15/M4 Stock Wrench The Magpul AR-15 Armorers Wrench combines American, solid steel construction and Magpul ingenuity to create the perfect tool for your next build!
Midwest Industries AR-15/M4 Stock Wrench Real Avid AR15 Scraper Leapers Ergonomic AK/SKS Sight Tool SCP-WEA05 Midwest Industries Ar15/M16 Handguard Removal Tool

Our Price:
$5.25
In Stock
(46)

Our Price:
$12.99
In Stock
(14)

Our Price:
$7.99
In Stock
(5)

Our Price:
$9.99
In Stock
(23)
Midwest Industries AR-15/M4 Stock Wrench Real Avid AR15 Scraper - AVAR15S Leapers Ergonomic AK/SKS Sight Tool SCP-WEA05 Midwest Industries Ar15/M16 Handguard Removal Tool MI-HRT
Midwest Industries AR-15/M4 Stock Wrench A faster, easier way to clean the bolt carrier group. The AR 15 Scraper removes heavy, baked-on fouling from 12 critical bolt carrier group surfaces faster and easier than brushes and solvent alone. It speed-cleans all 4 major parts of the bolt carrier group: the bolt, firing pin, bolt carrier and bolt cam pin. The swivel protects your hand from the double-ended scraping edges. It’s ideal for any workbench, cleaning kit or range bag.
The Leapers Ergonomic Sight Tool for AK/SKS pattern rifles allows for fine windage and elevation adjustments to your rifle's front sight.  Made out of harder steel to prevent being broken when adjusting the front sight post or bend when adjusting the windage cam. This tool eases the removal of the handguards on both carbines and full sized rifles. All areas that contact the rifle are protected to prevent damage to the finish of the rifle. Fits the AR15, M16 and M4.
Tapco AR15/M16 Front Sight Tool Otis Technology BONE Tool MSR/AR/AR-15 Rifles DPMS AR15/M16 Armorers Multi-Tool Geissele AR10/SR25 Reaction Rod

Our Price:
$6.99
In Stock
(35)

Our Price: $24.99
Sale Price: $19.99
You save $5.00!
In Stock
(2)

Our Price:
$31.99
In Stock
(20)

Our Price: $199.00
Sale Price: $159.20
You save $39.80!
In Stock
AR15/M16 Front Sight Tool Otis Technology BONE Tool MSR/AR/AR-15 Rifles FG-246 DPMS AR15/M16 Armorers Multi-Tool TL-MW Geissele AR10/SR25 Reaction Rod GAT10-247
The TAPCO AR Front Sight Tool is a four post model designed to work with the A2 front sight. MSR/AR-15 rifle owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas, causing jams and malfunctions. The B.O.N.E. Tool was designed specifically to clean the bolt carrier assembly area of .223 Rem/5.56mm NATO rifles.

Specifications and Features:
Otis Technology BONE Tool FG246
Scrapes carbon and fouling from the Bolt, Bolt Carrier and Firing Pin
Threaded hole is 8-32
Can act as a T handle

Fits:
MSR/AR-15 Bolt carrier groups

The DPMS Armorer's Multi-Tool gives you virtually everything you need to do most common AR15/M16 tasks.

  • Prevents damage to upper receivers caused by vice blocks
  • Precision machined of 4140 Chrome Moly Steel
  • Perfect for installation and maintenance
Wheeler Level-Level-Level Spikes Tactical Block-Worx Upper Vise Block SAT1004 KNS Precision Combination Sight Tool for AR15/AK47 TAPCO Rifle Chamber Safety Flag Tool Package of 6

Our Price:
$18.99
In Stock
(4)

Our Price:
$45.99
In Stock
(11)

Our Price:
$12.99
In Stock
(5)

Our Price:
$6.99
In Stock
(14)
Wheeler Level-Level-Level Block Worx Upper Vise Block SAT1004 KNS Precision Combination Sight Tool for AR15/AK47 - KNSARAKFST TAPCO Rifle Chamber Safety Flag Tool Package of 6 TOOL9002PACK6
Wheeler Engineering Level-Level-Level Scope Crosshair Leveling Kit
  • Block Worx Upper Vise Block SAT1004
  • Made of HDP (High Density Polyethylene
  • 2-piece design
  • Supports upper for cleaning, maintenance, and assembly
  • Natural material finish
Designed to work with both AK front sights and AR platform front sights, this high-quality tool also features a T handle for improved ergonomics and control. The TAPCO Chamber Safety Flag Tool has multiple uses. As a chamber flag, this tool clearly shows that the weapon is unloaded and has a strengthened head for increased durability.
Geissele Gas Block Pin Punch Set NcStar Essential Gunsmith Tool Kit Samson Field Survivor FS-001: AR-15/M16 Tool Kit Free Shipping Wheeler FAT Torque Wrench

Our Price: $25.00
Sale Price: $20.00
You save $5.00!
In Stock
(3)

Our Price:
$69.99
In Stock
(1)

Our Price:
$94.99
In Stock

Our Price:
$49.99
In Stock
(2)
Geissele Gas Block Pin Punch Set 15-172 NcStar Essential Gunsmith Tool Kit - TGSETK Samson Field Survivor FS-001: AR-15/M16 Tool Kit Free Shipping FS-001 Wheeler FAT Torque Wrench
The Geissele Gas Block Pin Punch set are made specifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block on an AR-15/AR-10. Removal of a rusted in gas block roll pin has always been a challenge since there are no commercial pin punches in 0.078" diameter. 1/16" (0.062") punches have a tendency to bend and very few starter punches are available in 1/16" diameter. The Geissele punch set make gas block work a whole lot easier. The first punch to grab when removing the roll pin is the Starter Punch. This is the punch with the long tapered end. The long taper is much more resistant to bending and buckling than the straight shank of the Pin Punch. Use the Starter punch to just get the roll pin moving. Then use the Pin punch to drive the roll pin completely out. Resist the temptation to just be quick about things and just use the Pin punch; a hard rap with a hammer on a stuck roll pin will cause the Pin punch can bend. The Geissele Gas Block punches are made from properly hardened and tempered 01 tool steel. However, they are considered a consumable item. Eventually, they will wear out and will need to be replaced. Geissele will not replace tools damaged from misuse or normal wear and tear. Always make sure your weapon is unloaded and the magazine removed before starting work. As with any impact tool, the use of safety glasses is mandatory when using the Geissele Gas Block Roll Pin punches. NcStar Essential Gunsmith Tool Kit
The Samson Field survivor contains:
  • Broken shell extractor
  • Wire brush for bore cleaning
  • Ampule for oil for one field lube,
  • Cable to pull the brush through the bore
  • Carbon cleaning tool
  • Flat blade screwdriver
  • Feed lip adjustment tool
  • Gas key cleaning tool
  • Cotter pin hook
  • Strike Plate
  • Front sight adjustment tool.
  • Magazine feed lip gauge
Wheeler Engineering FAT (Firearm Accurizing Torque) Torque Wrench with 10 bits.
Dewey AR Cleaning Link Tool ARL Geissele Roll Pin Tool for Gas Blocks Tapco AK/SKS Front Sight Tool Weaver Deluxe Gunsmithing Tool Kit WV849719

Our Price:
$14.95
In Stock
(11)

Our Price: $12.50
Sale Price: $10.00
You save $2.50!
In Stock
(10)

Our Price:
$4.99
In Stock
(4)

Our Price:
$74.99
In Stock
(4)
Dewey AR Cleaning Link Tool ARL Geissele Roll Pin Tool for Gas Block - GA-RPT Tapco AK/SKS Front Sight Tool Weaver Deluxe Gunsmithing Tool Kit WV849719
The AR Link Cleaning Pin holds the upper and lower receivers open in
place for cleaning.  The ARL fits all AR-15 and AR-10 type rifles,
regardless of caliber, with standard and oversize take down pins up to
.316 inches in diameter.
  • AR Cleaning Link Tool
       
  • Fits All AR Style Rifles in Any Caliber
       
  • Utilizes Rear Take Down Pin to Hold Upper and Lower Receiver Open for Cleaning
       
  • Fits All Standard and Oversize Take Down Pins up to .316 Inch Diameter
  • Designed to securely hold a roll pin for easy installation
  • Roll pin collapses enough when pressed into gas block to allow easy removal of the tool
AK/SKS Front Sight Adjustment Tool
  • Weaver Deluxe Gunsmithing Tool Kit
  • WV849719
    88-Piece Tool Set
  • Hard Plastic Case
  • Steel Punch Kit
  • Brass/Plastic Hammer
  • Black/Green 849719
Real Avid The Gun Tool PLUS Wheeler Professional Reticle Leveling System Real Avid AR15 Tool Strike Industries AR Trigger / Hammer Jig

Our Price:
$39.99
In Stock
(2)

Our Price:
$44.99
In Stock
(1)

Our Price: $79.99
Sale Price: $67.99
You save $12.00!
In Stock

Our Price:
$36.95
In Stock
(4)
Real Avid The Gun Tool PLUS - AVGTKT211 Wheeler Professional Reticle Leveling System - WH119050 Real Avid AR15 Tool - AVAR15T Strike Industries AR Trigger / Hammer Jig - AR-THJ
The Gun Tool from Real Avid features 18 of the most common tools used on long guns in a compact and ergonomic design, and includes an EVA molded belt sheath and five extra drive bits! Get the most out of your scope by making ensuring it's properly aligned with the Wheeler Professional Reticle Leveling System.
Black oxide coated and packed with precision-made, mission-specific features, the AR15 Tool is the ultimate tool for black guns. The AR15 Tool removes carbon with ease from 12 critical bolt carrier group surfaces, helps make repairs, reduces malfunctions, helps customize and makes reassembly fast and easy. The tactical sheath is MOLLE compatible and designed to carry additional bits and the Front Site Adjuster for even greater capability whenever and wherever you need it.
The Strike Industries Trigger Hammer Jig allows you to see, test, and tweak your AR-15 triggers under normal spring tension without having to fight with a lower!
Geissele 15" 5.56mm Suppressor Alignment Rod Wheeler AR Pivot Pin Installation Tool Wheeler Space Saver Gunsmith Screwdriver Set 664507 Gear Sector Stock Wrench GS-4000

Our Price: $75.00
Sale Price: $60.00
You save $15.00!
In Stock

Our Price:
$9.99
In Stock
(1)

Our Price:
$13.99
In Stock
(3)

Our Price:
$8.00
In Stock
(5)
Geissele 15" 5.56mm Suppressor Alignment Rod Wheeler AR Pivot Pin Installation Tool - WH156243 Wheeler Space Saver Gunsmith Screwdriver Set 664507 Gear Sector Stock Wrench
The Geissele Suppressor Alignment Rod (SAR) is a precision gauge used to verify the alignment of a suppressor to the bore of a firearm barrel

Note: Suppressor alignment is determined by several factors:

1. Centerline alignment (offset and angular) of the barrel threads to the bore.
2. Perpendicularity of the barrel shoulder to the threads.
3. Alignment of the muzzle device’s internal diameter threads and torque shoulder to the suppressor attachment geometry.
4. Alignment of the suppressor mounting ID geometry to the bore of the suppressor.
Never lose another pivot pin detent spring with the Pivot Pin installation tool from Wheeler! As an added bonus, it doubles as a roll pin tool!
Wheeler Space Saver Gunsmith Screwdriver Set - 26 Bits Gear Sector AR-15/M4 Stock Wrench
Tapco Enhanced AR-15/M4 Stock Wrench Tapco Ar15/M16 Handguard Removal Tool Real Avid Gun Tool Pro-AR15 Otis Technology BONE Tool MSR/AR/AR-10/LR308 Rifles

Our Price:
$11.99
In Stock
(13)

Our Price:
$11.99
In Stock
(12)

Our Price:
$50.00
In Stock
(1)

Our Price:
$24.99
In Stock
Tapco Enhanced AR-15/M4 Stock Wrench Tapco Ar15/M16 Handguard Removal Tool Real Avid Gun Tool Pro-AR15 - AVGTPROAR Otis Technology BONE Tool MSR/AR/AR-10/LR308 Rifles FG-276
Tapco Enhanced AR-15/M4 Stock Wrench This tool eases the removal of the handguards on both carbines and full sized rifles. All areas that contact the rifle are protected to prevent damage to the finish of the rifle. Fits the AR15, M16 and M4. When it comes to mission-specific tools the new Gun Tool Pro-AR15 is packed with functionality.  Thirty-five highly-capable tools in a tactical, rugged frame work with ease and precision to keep black guns firing reliably and accurately.  From tear-down and scraping carbon, to maintenance and reassembly, the Gun Too Pro-AR15 is the partner to have in the field, at the range or workbench. AR-10/LR-308 rifle owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas, causing jams and malfunctions. The B.O.N.E. Tool was designed specifically to clean the bolt carrier assembly area of .308 Win/7.62x51mm NATO rifles.

Specifications and Features:
Otis Technology BONE Tool FG276
Scrapes carbon and fouling from the Bolt, Bolt Carrier and Firing Pin
Threaded hole is 8-32
Can act as a T handle

Fits:
MSR/AR/AR-10/LR-308 Bolt carrier groups