Anderson Manufacturing Hammer and Trigger Kit - Stainless Steel
Details
Details
Enhance the performance and reliability of your firearm with the American-Made Anderson Manufacturing Hammer and Trigger Kit in. This comprehensive kit includes all the essential components you need for a smooth and precise trigger pull. Constructed with precision and attention to detail to ensure top-notch quality.
Featuring a single-stage small pin trigger, this kit includes the Anderson Manufacturing stainless steel hammer and trigger set. The stainless steel construction offers exceptional durability and corrosion resistance, ensuring long-lasting performance. The kit also includes a lightened speed hammer, which significantly improves lock time for faster and more accurate shooting.
Included:
- Stainless steel hammer for enhanced durability
- Hammer spring for reliable and consistent hammer performance
- Stainless steel trigger for a smooth and crisp trigger pull
- Trigger spring for optimal trigger reset
- Hammer/trigger pins for secure assembly and stability
- Disconnector for precise disengagement of the hammer and trigger
- Disconnector spring for proper functioning and reset
Specifications
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.Ratings & Reviews
59 reviews
you’re a wimp if you NEED anything better
by Chris
AR triggers are not like hand gun triggers, they don’t have the slop or creep people wine always about. The trigger only travels about a half inch. Even the cheapest of ARs have a pretty clean break.
Fast shipping!!!!
by Aaron -
Trigger looks good and will install in a day or so. Fast shipping, great communication through emails from the time it was ordered to final email letting me know that it was delivered. Will buy from Primary Arms again.
Decent
by Kevin -
I never recieved the disconnector. Everything else is pretty self explanatory.
Better than expected
by Mike H
For the cheapest Hammer trigger setup out there this actually turned out pretty nice. The Machining of the Seer and trigger is a bit crappy looking you could actually see the milling Mark's. It's supposed to be stainless but doesn't appear to be since its sticks quite well to a magnet. The trigger shoe finish wasn't quite appealing so I ran it through a sandblast to give it a nicer appearance. I ran a stone on the sear area very lightly just to smooth out the edge but didn't get aggressive pretty much left it the way it came. Put some milcom grease on it and installed it with a JE enhanced reliability red hammer spring and a yellow trigger spring. Much to my surprise this trigger is awesome 4 1/2 lb pull no take up just clean break. It must have a shorter ledge on the sear area of the hammer then a common mil-spec hammer. 100 + rounds No misfires.
Long and Gritty
by Joe Grunt -
Does the trigger work? yes. Should you buy it? Probably not.
The pull feels long and gritty, probably due to the coating? you getting what you're paying for here.
The only reason I purchased this is that I wanted something cheap for my 80% build. Would I buy another? No.
I'm guessing a lot of these function bad reviews are due to improper installation.
If you want a good mil-spec trigger? go with the ALG/ACT or BCM/PNT.
Great mil-spec replacement
by Christian
If you are not wanting the mil-spec trigger but don't want to spend a lot on a new trigger, this is a great alternative! I bought two of these a year ago or longer that I just installed on new builds. Very smooth pull that is not quite as heavy as mil-spec. I would definitely buy again.
Good Basic Trigger that has Potential
by Rob
These a good basic triggers overall. However with a little work they can be made into nice triggers. The edges of the trigger needed to be rounded for my tastes, so a little judicious stoning and reshaping works wonders. Then a little polishing on the engagement surfaces of the hammer and trigger cleans them up nicely. The final product is a smooth trigger with a crisp break. One could add some different springs, such as the JP spring kits, to it as the factory Anderson springs are fairly robust. That should yield a very smooth light trigger. I give them 4 stars for being a good solid start but needing a little refining.
Surprisingly good trigger.
by Mark
This is a surprisingly good trigger for under $30, especially when paired with a JP Enterprises enhanced reliability spring kit !! And the trigger shoe can be shaped and sanded as its stainless steel, if you find it the least bit uncomfortable. Very little creep, nice clean break, worth every penny.
Very nice
by Mark
Paired with a JP Enterprises enhanced reliability spring kit, makes this a very nice trigger with very little creep and a nice clean break !