C&H Precision Weapons Walther PDP V4 MIL / LEO with Trijicon RMR/SRO and Holosun 407C/507C/508T Adapter Plate
Manufactured by C&H Precision Weapons
Details
Details
If you own a Walther PDP V4 produced initially as a duty gun for Military and Law Enforcement and use OEM sights and want to improve accuracy, one of the best upgrades you can make is an optic system. To get the best performance from your Walther pistol using a Trijicon RMR/SRO and Holosun 407C/507C/508T, you will need this adapter plate from C&H Precision.
Features:
With this plate from C&H Precision Weapons, you can mount a Trijicon RMR/SRO and Holosun 407C/507C/508T optic system easily in minutes, known industry-wide as an excellent optic system for concealed carry pistols.
Made right here in the USA, this Walther PDP V4 optic mount plate made for the Trijicon RMR/SRO and Holosun 407C/507C/508T optic system allows you to change to an optic solution at a surprisingly affordable price.
Features:
- Compatible: Trijicon RMR/SRO and Holosun 407C/507C/508T
- Material: Stainless Steel
- Fits: Walther PDP V4 MIL-SPEC
With this plate from C&H Precision Weapons, you can mount a Trijicon RMR/SRO and Holosun 407C/507C/508T optic system easily in minutes, known industry-wide as an excellent optic system for concealed carry pistols.
Made right here in the USA, this Walther PDP V4 optic mount plate made for the Trijicon RMR/SRO and Holosun 407C/507C/508T optic system allows you to change to an optic solution at a surprisingly affordable price.
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Ratings & Reviews
1 review
11/23/2023 4:18 am WLPDP-RSH
This plate WILL NOT WORK for a PDP 2.0!
by Tim -
It should be stated more clearly that this plate is for the PDP 1.0 generation which has a completely flat cutout for the optic plate. If your PDP serial number starts with these letters and numbers or higher (FDL9203 and up, FDM0001 and up, FDN3124 and up), and your optic cutout has depressions and channels cut into the slide, YOU MUST USE A 2.0 COMPATABLE ADAPTER PLATE!