Foxtrot Mike Products Premium LPK with Ambidextrous Safety - No FCG/Grip
This LPK includes:
- Ambidextrous safety selector
- Safety detent and spring
- Buffer retaining pin and spring
- Magazine button and spring
- Magazine catch and spring
- Front and rear takedown pins
- 2 takedown pin detents and springs
- Bolt catch
- Bolt catch plunger and roll pin
- Made in the U.S.A.
Feature rich, high-quality, and affordable, Foxtrot Mike Products offer cutting edge solutions utilizing the highest quality materials and manufacturing processes available.
Ratings & Reviews
Foxtrot Mike - code name for garbage!
by Steven -
I can't believe that these guys are getting away with selling this crap! I stopped trying to make this pile of garbage parts work when both the safety selector and the magazine release parts were out of spec. Buy something else.
fits nice and works great.
by darkspectro100 -
Quite tight when installed but was easily solved by adding drops of oil to each components. Very pleased.
by J -
I bought this a while ago, just recently started the build though. The kits is junk. The magazine release is too big and catches, fits very poorly. The detents prings are too long and won’t allow the detent to be pushed in far enough. Waste of money, buy something else.
What more is there
great kit for the price parts worked A ok
by Brandon -
Terrible kit!!! I had to cut both take down springs they were way too large and I couldn’t push the detents anywhere near where they needed to be. The mag catch was also way to big and it hangs up in the channel of the lower. This was an Aero lower!
Do not buy!
by Tim -
Selector detent was not in package, pivot and takedown detent springs too long, magazine catch too wide to function without some serious grinding on it. I tried all these parts in two other lowers to verify. This is just all around a horrible product. At least it came in a nice package. I contacted Primary Arms to see what they will do but I will not buy anything with the Foxtrot Mikes logo again. There were far too many errors for it to be a singular event.
<br>From PA: We're sorry that you had this issue and we'll be happy to take care of you.
by Kevin -
Parts were tested in several in-spec lowers, the following problems are not with the lowers. Magazine release slightly oversize, binds in slot on left side of receiver. Takedown pin detent springs are too long when compressed. They are normal length at rest, but either too many coils or too thick of wire. Primary Arms promptly mailed me replacement from another brand at no cost. I tried calling Foxtrot Mike but no answer and no way to leave message.
Ordered and it showed up in time for a shoot parts went in together and fucntioned perfect
Was skeptical on price and reviews on this but bought because of price m. When arrived it went together easy
Good kit fit is good
Good price, good parts
Spot on parts kit
I’ve built a lot of of lowers in my day and I got to say this was simple and for a fraction of the price I was more than pleased! I had a question and the fellow I talked to walked me thru the process and wasn’t a jerk. I would buy many more for future builds
The lpk kit I got was spot on, everything fit right in place, although I haven’t built many pcc’s before it was a breeze! Pound for pound really good!!
Love mine, no issues. FM is easy to work too, very helpful.
Mine works great, put it on an Aero lower, no issues. Why do people leave a bad review instead of reaching out to Foxtrot Mike, they seem great to work with?
Excellent Customer service
by Customer -
I don’t normally write reviews but have to compliment FM and PA on their customer service. Using this kit for a build, I boogered up the safety selector fastener. No fault of the product which is a good value considering ambi safety selectors at this time are @ $15 on the low end when purchased individually. I wanted to buy just the screw but they helped me out no charge. A+ in my book. Little things like this keep me coming back to Primary Arms and put Foxtrot Mike in consideration for my next 9mm AR pistol purchase. Thanks guys!
Not to standard, bad manufacturing
by Mike -
Considering this lower parts kit did not include a trigger group, maybe I expected too much.
<br>There are only so many ways you can screw up a mil-spec lower parts kit, but in my instance, they decided not to thread the magazine release button.
<br>It also appears that the bolt catch was somewhat fat, when I replaced it with a bolt catch from another hardware set, it had no problem releasing the bolt.
<br>The bolt catch ever thatcame with the hardware set from FM was so fat that it stuck in the channel when it was installed.
<br>I know those are only two problems, but when I have bought Aero, Anderson, or Spikes lower kits, I haven't suffered these sorts of problems.
<br>I really don't think I'm buying anything else from this manufacturer. It is a simple mil- spec bit of manufacturing done by a number of companies perfectly well. I don't need to accept failure from this manufacturer.
<br>Primary Arms was great as a source, no problem there.
What I Expected
by Matthew -
Same problem as other reviewers, everything but the magazine catch works just fine.
<br>I found two issues with the magazine catch that were definitely affecting it's function.
<br>1. the arm of the mag catch was out of square and bent inwards a bit, bending it back made things a bit smoother.
<br>2. the radius of the end of the arm that threads into the button arbor is a tad too large, causing the arm to drag on the frame.
<br>Aside from the annoying mag catch, everything else was good.
GREAT CUSTOMER SERVICE
by Michael -
Are good designed for milspec receivers a bit tight on billet. Did have one on which the mag catch button was not threaded. Contacted F-M website they replied in an hour requesting my address 2 days later had a complete assembly not just the button in my mailbox GREAT SERVICE. And all ambi safety selectors I've used stick out I don't want it rubbing to impede function. I personally read the reviews comments for humor to spot the NOOBS
mine works fine!
just installed this LPK in my lower and it is outstanding! idk what the low ratings are about before me. I see a machined pocket in the mag release but not a chunk missing. my mag release fit into my Aero lower with ease. the ambi selector switch screws are not "soft" you just don't need to over tighten them... all the reviews before me need to use common sense when assembling a lower. I have multiple FM9 uppers and have had nothing but great customer service from this company.I don't understand why you wouldn't reach out to them them first. they would be more than happy to take care of you.
by Jorge -
Front take down pin isn’t oriented correctly. Safety selector doesn’t fit correctly and sticks out. At first I though it could be the lower but I tried it on a different receiver and same issue.
Look no MIM, all billet + nice quality, worked great in my build.
Love mine, looks like no mim parts like standard Indo-Mim DPMS stuff, everything looks like it was made on a cnc out of billet. Nice black color, worked great in my Aero 300BO build.
Do NOT waste the money
by rafael -
This kit is terrible and a waste of money. Mag release doesn't fit without filing.....the safety selector is also way to big..... i kept the springs and pins as spares but threw the rest in the garbage
<br>From PA: I'm sorry to see that you received a bad product. One of our techs will contact you to assist.
Included parts were fine. Missing a roll pin.
by Marcus -
The parts all seemed fine, except that the bolt catch roll pin was missing. I had to scavenge from another firearm, which was disappointing. I'll make sure to check all my parts when I receive LPKs henceforth. The ambi safety seems to stick out a little far on the right side, and it doesn't go quite to horizontal to indicate safe. It's possible I did something wrong with the installation, so I'll ask around.
<br>From PA: We're sorry that you received a bad product. One of our techs will contact you to assist.
by scott -
Same as below, mag catch does not fit. Other parts fitment issues.
<br>From PA: We're sorry to hear that you received a bad product. One of our techs will contact you to assist you with this.
Low quality parts with fitment issues
by Joe -
Like the review before me, I too had issues with the mag catch sticking. I took a file to the sides of the mag catch & it was clear that there was high spots on the edges. About 5 min of file work & rebluing fixed the issue. Also the mag catch button that came in the LPK had a chunk missing off the back of it from what looks like bad machining. Luckily I had a spare and used that. I also am not a fan or how far the safety selector sticks out off the lower receiver and the screw head stripped out very easily. I've used a lot of cheaper LPKs before but this is by far the worst quality I've found.