James Madison Tactical Saber Single Stage Drop in Trigger 3.5 - 4 lb
Out of Stock
- 3.5 - 4 pound trigger pull
- Drop in design
- CNC machined and EDM cut 17-4 PH stainless internals
- 6061-T6 aluminum housing
- Compatible with AR-15 and AR-10 rifles
- Mil-Spec .154" pin diameter
- Includes anti-rotation pins
This trigger is designed specifically for use with MIL-SPEC lower receivers that feature standard .154" trigger/hammer pin holes and includes anti-rotation pins for stress free installation.
Ratings & Reviews
by Anthony Tassone
Have this trigger in my carbine. It is absolutely amazing!!! Great upgrade to my AR. Smooth and crisp. Will be using this trigger in other builds. Price is perfect!
3 round burst, no reset. Poor customer Service
by W--- -
Had the same issue as many on here. Went 3 round burst in a long range precision rifle, no reset after. Left several voicemails at JMT, no response. POOR CUSTOMER SERVICE. It's now a $100 paperweight in my safe. Zero rating if I could.
I dunno why people have had bad experiences with th his trigger. I'm in 3rd at build with this trigger and they all run smooth and crisp.
Fires 3 round bursts and doesn't reset
by Jarret -
I got this trigger for my son for Christmas (2017) and we just got out to shoot it last week (4/19). It shoots 2-3 rounds when you pull the trigger and also doesn't reset about 1 out of 5 rounds so it won't shoot. It's too bad because it was really light and smooth. I'm not sure what the warranty is on these but they are not safe.
by Damiano -
Nice Drop in trigger. After reading bad reviews here and there I was worried but I give it a try. I'm really happy with this trigger, dropped in, run to the range and shoot 250 round without issue. No double/triple fire or any problm of any kind. For the price this is a really nice drop in trigger.
Great trigger works everytime
by Kane D
Ordered it and bought the 3 day shipping as well it came three days later installed no problems it came with anti walk pins which was nice and also has set screws if you wanted to use your regular factory pins... ran 300 rounds 150 Tula and 150 green tip ammo not a single failure, very pleased with the product.
Good for "Full Semiauto"
This trigger feels real nice when I dry fire it. I took it to the range (finally), and the first 3 mags were good. But once I got to the fourth, it went "fully semiautomatic". When I took it home and messed with the trigger (trying to figure out what was going on), it worked just fine while dry firing. And finally I tested the hold of the hammer. Holding the trigger down for the reset, I tugged on the hammer and it easily released. I'm not too familiar with these things, so I checked my other AR's trigger (which is mil spec). When I repeated the same test, the hammer wouldn't release. I'm guessing that's where the issue comes from. Long story short, I'm gonna look for another trigger.
Amazing quality at an Amazing price
by Justin -
I love this Trigger. I bought two additional after my initial one. I put the first into my 6.5 Creedmoor and it's a dream. So easy, crisp, no take up, a welcome surprise every time you pull it, so no anticipating the release just click! I put the next one in my .300 BLK and just as reliable as the first. The third is in my 7.62x39 and no issues. I read one guy had an issue in his ultra-light build it going full-auto, I have had no such issues in three builds and I haven't had to adjust any trigger pull. Can't wait for them to get back in stock so I can order five more for my other builds, .458, .308, 6.5 Grendel.........
by Ramrod -
I installed this on my lightweight tactical AR-15. Took it to the range and the first three times I fired it it shot 2-3 rounds full auto. You can adjust it not to do this but it adds to the trigger pull. I found it to be a bit gritty on the pull. Very unhappy with this product for what I expected. If you want uncontrolled full auto this is the trigger for you. (Idiot)
James Madison Tactical — 👍👍👍
by Matt -
Awesome product at an awesome price point! Nothing else to say really! I put this trigger in a new 9mm blaster build and couldn’t be happier. The Saber is so smooth and has zero creep and no takeup! I have a G... more expensive trigger in another rifle I built and this one matches it for crisp pull and smooth travel! I will buy another one!
by Michael -
Excellent trigger. No issues at all. Looks great, fits great, works great. All with a price that fits the budget of almost any build. Will definitely buy another.
Light strike issues
Had to return due to constant light strike issues. Spend a little more for a better setup.
Beware of full Auto
by GREGORY -
This is a beautiful trigger and has a nice clean crisp action. However I can't recommend this product. I had it in my 300blk AR an she fired fine with not issues, every round went off without a hitch. I ended moving this trigger to another AR lower with a Magpul UBR lower and this trigger simply did not work right. I tried with a grendel, 7.62x39 and 223 upper and in all cases she either required a reset after firing each round or she went "full auto" randomly. Grendel rounds are not cheap and when I would pull the trigger, it would randomly full auto 2-4 shots. Sounds cool but when you have a scope and you're trying to be accurate, full auto is highly inconvenient on top of burning ammo. I put it back on a blackout and it did fine not problem. Overall since it is not fully compatible in many AR configurations I give it 3 stars. Just not something I would want on a gun that I depend on for reliability.
Maybe Mine is Bad
by Ryan -
Great looking trigger, clean break with little to no creep. However, my trigger won't reset. I spend more time messing with it trying to get it to work than I do enjoying my time at the range.
As always fast shipping by PA. Very pleased with the jmt trigger. Dropped it in and fit was great. Very smooth pull with crisp break. I could feel ever so slightly a touch of creep but was very smooth and consistent. I am very impressed with this trigger for the price. Also very well made. Unless you need a bench rest trigger this is a good choice for use in the field
Surprised it was awesome. Phenomenal value.
Pleasantly surprised! Is definitely as advertised, easy to install and clean break. Very little/if any creep. Buying a second for my 300BLK. Only issue is it was did not come with install instructions. Would have been nice. You get a lot for $100. The anti roll pins and screws are a Gamechanger. Make sure you reinstall the safety/selector before tightening down the vertical screws to add tension and brace up the trigger. Make sure the vertical screws are not so tight you can’t easily adjust the safety selector. Love this trigger in my AR-15. It’s not a $300 Geissle but I’m not shooting Competition with these rifles just plinking steel. You won’t regret getting this trigger.
Great trigger for the price!
by Brent -
I installed this trigger in my pistol and absolutely love it!
<br>Easy to install and functions better then the stock one!
<br>Very crisp pull and reset!
by Jeff -
The good: The trigger looks great and after putting in the set screws to just snug to remove the play, it fits great. The break is very clean and crisp. On the bench, this trigger feels awesome.<br><br>The bad: The reset is so short that you can get an unplanned double tap even from a rifle with mild recoil (6.5 Grendel). I got 2-for-1 twice in my first 10 rounds. I'm glad I wasn't using my 450 Bushmaster. Also, out of 25 rounds, three times it failed to fire due to light primer strikes on typical Winchester WSR primers. All of them fired fine with an extra strike.<br><br>The double fire could possibly be attributed to how tight the rifle is held and how the trigger is pulled, but there isn't much the user can do about light primer strikes.
You get what you pay for!
by Morgan -
Very disappointed in the producted, I have nothing against primary arms they’re great. This item when trying to install from my local gunsmith the tigger had little bit of play and a weak spring; as well the selector switch couldn’t function properly anymore. I believe I just had a item that was defective but I would not reccomnend this item and will stick with CMC Geissele and ALG.
by matt -
Trigger has a nice finish, fits in lower loose but tightens up nice with the two set screws on the sides. Trigger feels nice and has a nice break. The anti rotation pin kit was plastic but has stainless pins, not really an issue but worth the mention may be a problem for some. For 100 bucks is a nice upgrade from a stock trigger. Happy with the appearance and function would purchase again. (4 star only for the plastic outer brackets)
Crisp single stage at a good price
by Patrick -
Strongly disagree with the other reviewer on this trigger. Maybe he was sent the wrong item or something, because I can't believe we both got the same thing.
<br>The trigger is definitely a true single stage trigger. There is absolutely NO creep whatsoever, just a nice crisp break once you apply the right amount of pressure. We didn't have a trigger pull weight scale, so I can't speak to the accuracy of the pull weight, but it was certainly comfortable. Definitely a quick reset as well - I was able to confidently and accurately double tap 25 yard targets.
<br>All around a solid trigger, especially for the price. Ordered another one to replace the stock trigger on another AR-15.
<br>*note: trigger was installed on an 8.5" barrel .300 blk pistol