NcSTAR Essential Gunsmith Tool Kit

Manufactured by NcSTAR
Manufactured by NcSTAR
3 Reviews

In Stock

NOTE: Limit 5 per household. Quantities exceeding 5 will not allow checkout.

We are fully staffed and processing orders. Standard orders are shipping in approximately 7 business days or less. FFL orders take approximately 10 business days if you can provide us an actively receiving FFL location.



The NcStar Essential Gunsmith Tool Kit offers nearly every bit needed for your amateur gunsmithing needs, neatly packaged in a soft durable case. Tool Kit Contents: Mallet with Nylon & Brass ends - 11"L Screw Driver Handle with ¼" Hex Drive - 7.4”L Needle Nose Plier - 4.5"L Triangle Mill file - 7.7"L Gunsmith Bench Block - 4" Dia. Nylon Jewelers’ Screw Drivers Set - 6 pcs: --- Phillips - #0, #1 --- Flat Steel Punch Set – 8 pcs: --- Roll Pin Drift Punch - 3/32", 1/8", 3/16", 1/4" --- Drift Punch - 3/32", 1/8", 3/16" --- Center Punch - 4.8"L Brass Punch Set - 5 pcs: --- Brass Drift Punch - 1/8", 5/32", 7/32", 1/4", 5/16" Polymer Punch Set - 2 pcs: --- Polymer Drift Punch - 7/32", 5/16" ¼" Screw Bit Set - 30 pcs: --- Flat Blade(mm): 3, 4, 5, 5.5, 6, 7 --- Phillips: PH0, PH1, PH2, PH3, PZ0, PZ1, PZ2, PZ3 --- Hex: H3, H4, H5, H6 --- Torx: T10, T15, T20, T25, T27, T30, T40 --- ¼" Hex Bit to ¼" Socket Adapter --- Square: S1, S2, S3 Safety Glasses - Clear Lens Soft carry Case - Black (11.5" T x 15.5" W x 3.25" D) Weight: 68 oz.
See More


Weight4.25 Oz

WARNING: This Product can expose you to chemicals which is known to state of California to cause Cancer and Reproductive Harm. For more information, see

Ratings & Reviews

3 reviews

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews

Poor Quality and QC


QC: One of the steel punches was bent upon opening case. Quality: Cast metal head that holds brass tip cracked at threads on third rifle build. I did check the brass tip to make sure it was screwed in all the way before use and it looked fine.

Run! Do not water your money

by -

Steel punches went nice and bent when I opened the case, hammer head is so loose I won't even try using it and the brass is so soft it got mangled on a roll pin. There's no pin starter punches like it claims it's just cheap junk. Don't waste your money on this

Novice turned Pro


I've at-least put together 8-11 rifles with this same kit and can honestly say I like it for the price point. Your not buying name brand tools so yes it's gonna have a few hick-ups. Honestly if you pair this kit with the Guntec Roll Pin Holders your gonna have a good time.