Timney Alpha Competition Trigger Fits Glock Gen3-4
Please Note: This trigger only fits double stack 9/40 models.
- Fits Glock Gen 3-4 handguns
- 3 pound pull weight
- Teflon Nickel coated trigger bar and sear
- Flat aluminum trigger shoe
- Red anodized safety lever
- Uses stock Glock springs and parts
- Drop in installation
- Hand assembled in the U.S.A.
- Lifetime manufacturer’s warranty
The Timney Alpha Competition Trigger uses all the factory Glock springs and parts and retains all the same safety features as a standard Glock. The trigger shoe features a flat faced design with an anodized red safety lever. Every Trigger is hand assembled, tested, and calibrated in their state-of-the-art facility and comes with a lifetime warranty.
Timney Triggers was founded in 1946 with the mission to bring consumers high quality, precision AR-15 and AR-10 components. They have since built a reputation that resembles this sentiment by providing triggers that are optimized for competition use by competition shooters. If you have an AR, it needs a Timney trigger.
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Ratings & Reviews
by Charles -
This is a revolutionary design, it is easy to install and seems very well made. The trigger pull is radically different from stock.
Best trigger for a P80.
by WILLIAM -
Love this trigger. Best aftermarket trigger I've ever tried.
NOT FOR POLYMER 80
by Ryan -
This is a great upgrade for a stock Glock as it requires Glock parts. It is not compatible with a Polymer 80 trigger housing. You will need to find a Gen3 Glock trigger housing if you've built your own. Good luck.
This trigger looks to be the same as the Alpha one triggers they sold on Delta Team Tactical’s website. If so I just lost a lot of hope for Timney Triggers.
Most incredible Glock trigger
by Bob -
I used the red trigger spring and a Ghost 3.5 connector. I adjusted the pre travel screw a turn and a half. My average of 3 pulls is 1# 14oz. Competition only!
Best competition glock trigger by far
Just recently put together a competition gun for carry optics division. Primary arms had this on sale and ive heard pretty good things about them. Install was easy and the trigger is LIGHT and CRISP! You can adjust take up, which i recommend, and just a couple drops of oil to provide lube at the friction points. Absolutely by far the best glock trigger for competition. I personally wouldnt use this trigger on a carry weapon, its that light. Thanks primary arms for having the best products and fast shopping you guys rock!
by Jimbo -
Easy to install, effortless to use. Great trigger.
This is your first upgrade!
by Milvetmac -
Very easy install, paired it with a lantac short reset trigger bar and it has an extremely crisp break and a reset that couldn’t be any better. Has a slight creep I’m going to try and work out of it but that is really just being excessively a$al. This is the best trigger I’ve ran in a glock, especially out of the box! Worth every penny
by Terry -
All I can say is WOW!!!! What a huge difference over the stock trigger! My 19 was at almost 7lb pull out of the box, this drop in along with a new plungerspring reduced it to 3.5lbs. It completely eliminate that jurkie mushy take up section of the trigger. The wall is sharp and chrisp and mine has a very short reset.
Over all I couldn't be happier with the result.
by Alex -
I have 3 of these triggers and they are great . Once installed they have a super clean break and do break at 3 pounds . Thanks have had no issues with any of them and will continue to use them . Very happy with trigger !