Leapers UTG PRO Model 4/15 13" Super Slim Free Float Handguard - Black

SKU: MTU006SS
MPN: MTU006SS
Manufactured by Leapers UTG
28 Reviews

$97.99

$104.97

Out of Stock

NOTE: Limit 5 per household. Quantities exceeding 5 will not allow checkout.

$97.99

$104.97

Out of Stock

Details

The Leapers UTG PRO Model 4/15 Super Slim free float handguard is a lightweight, ergonomic handguard for the AR-15. The free floated design increases air flow around the barrel for increased cooling, as well as improved barrel harmonics and increased accuracy. Like all UTG PRO items, this handguard is proudly designed and made in the U.S.A.!

Features:
  • Lightweight and ergonomic design
  • 12.85" model covers rifle length gas systems
  • Includes three 2-slot rail sections
  • Includes barrel nut
  • Weighs just 12.0 oz
  • 1.65" width

Specifications

Accessory AttachmentProprietary - Included
ColorBlack
FinishHardcoat Anodized
Gas System LengthExtended Rifle
Handguard Length13.00 in
Inner Diameter1.36 in
Manufacturer.Leapers UTG
MaterialAluminum
PlatformAR-15
Weight12 Oz
  • UTG Pro 4/13 Super Slim Free Float Rail - Rifle Length - MTU006SS

WARNING: This Product can expose you to chemicals which is known to state of California to cause Cancer and Reproductive Harm. For more information, see www.p65warnings.ca.gov

Ratings & Reviews

28 reviews

4.8

LOOK CAREFULLY! Especially if you’re buying accessories at the same time!

by -

This is a nice handguard. It’s easy to install and is very light and sturdy. HOWEVER, there is no M-Lok at the 6 o’clock position, which makes NO SENSE. This means you can’t use M-Lok accessories like fore grips, vertical grips, etc. you have to buy Picatinny accessories and add a pic rail(s) at the 6 o’clock position. PLUS, the M-Lok is NOT spaced like standard M-Lok so you can’t use accessories like BCM rail covers because the spacing is off.

Go like a pro!

by

Bought these in 15" and 13" for two build and they are rock solid and well finished. Happy to buy a made in the USA product, especially when it performs flawlessly. I like to tinker with my guns so these rails have been put on and removed at least ten times and they always reinstall like new. Recommend these to all competitive shooters and builders.

Solid product

by -

I bought one of these for a SPR / DMR rifle set up. I had no issues with the install. The rail itself as measured from the end of the upper receiver is 12.5" long. The rail is 13" long if you include the side anti-rotation tabs that extend over the upper receiver. I've mounted a light, bipod, and grip on the rail without any issues. I've noticed some screws backed out over the period of 6 months. I reapplied Loctite and retightened the screws with no more issues.
<br>
<br>These rails will accommodate the SLR Rifleworks Sentry 7 Clamp-On Premium Adjustable Gas Block just fine.

Good solid handguard for a reasonable price

by -

I bought one on sale for a budget build and was pleased with it. I have more expensive hand guards for other ARs but this one but this one will do the job. I was a little hesitant to get something made by Leapers/UTG but after installing it I have no regrets.
<br>
<br>Very easy to install with out having to worry about indexing the hole for the gas tube. Went on like a breeze.
<br>
<br>It is lightweight like an ALG handguard. Looks fine and after installation seems robust enough. Nice ergonomic feel to it.
<br>
<br>If I was loading it up with a ton of add ons I might consider another hand guard because of its lightweight construction (always a trade off) but typical use it is GTG.

Excellent Quality

by

Delivered quickly. Easy to install, fit perfectly and the picatinny rail matched up exactly with my receiver's flat top. Very impressed at $119.

Excellent slim handguard!

by

This is an excellent slim handguard for the price. Installation is very easy and the fit is great. The finish matches very nicely with my melonite barrel.

UTG 13" hand guard

by

As usual PA has super fast shipping. The hand guard is perfect. I did notice if you have to torque it past 40 lbs the bottom of the barrel nut deform's a little. I just hit it with a fine file and it slid right on.

Great rail for the price

by

This rail appears to be of high quality and installation was a breeze. Makes my AR feel much lighter & feels great. I don't know how you can beat this rail for this price.

UTG HANDGAURD

by

Nice product for the price.

perfect fit, slim, sturdy good price

by

Shipped fast, no damage, perfect fit and looked better than the pictures online. After this purchase I bought other things from primaryarms and am completely satisfied with customer service.

UTG Pro 4/13 Super Slim Free Float Rail - Rifle Le

by

Product is superbly made and exactly as advertised. It comes complete with all the necessary components (barrel nut, shims, wrench, complementary rails, etc..) to finish the install the first time.Primary Arms shipped the product quickly.Well done to both UTG and Primary Arms.

AR build

by

Very slick.

AR build

by

Very slick.

for the price excellent

by

I'm not sure about durability.. installation easy just follow the instruction..fast service.. but shipping was delayed these time ...but it's not primary arms fault is the shipping company..

for the price excellent

by

I'm not sure about durability.. installation easy just follow the instruction..fast service.. but shipping was delayed these time ...but it's not primary arms fault is the shipping company..

Great value

by

This thing is very reasonably priced and seems to be the same quality as my vtac. Looks straight as can be mounted on my bravo company upper. The fact that the barrel lug on this system is independent of the gas tube allowed me to get it torqued down tight without worrying about it lining up the gas tube with any pre drilled holes like on my old nordic hand guard. Awesome product. Fast shipping from primary arms. Thumbs up for both

UTG Pro

by

This is a good rail for the money follow instructions or watch the on line video easy to install. I have put on a total of 11 different rails the Pro has a good barrel nut and lock system. No hassle with aligning holes for gas tube and comes with shims if needed square the receiver and simple torqueing. As far as primary arms they were no help when Fed Ex let my order sit for days before delivering will not order from them again.

Nice slim rail

by

Nice quality slim rail at a great price. It comes with everything you need to install the rail, including a wrench for the proprietary barrel nut. NOTE: This will not fit some billet uppers. The anti-rotation tabs are fairly large and need to align with the sides of the upper.

sweet

by

If you haven't purchased one these you don't know what you are missing. Serious bang for your buck!

UTG Pro

by

I purchased this hand-guard with mixed emotions about UTG. The product is packaged in a clear plastic box with instructions stuffed in the hand-guard itself. It also comes with the tool to properly secure and torque the barrel nut. the overall feel, look and finish of the product is 5 star. The barrel is free floated everything lined up perfect. I was surprised to see the product is made in the US. I would recommend this to a friend.very well made product.

A little leery but pleasantly surprised

by

I was afraid this would be a cheesy pile of junk but this is far from it. I currently own rails by Daniel Defense and YHM so have a little point of reference for an opinion. Bought one to try on my DPMS dedicated 22lr upper before trying on a .223. Build quality is pretty nice, install is easy with clear and straight forward instructions. Install took about 20min tops including taking off front sight and referring to instructions on each step. Prob could be done much faster by someone with more experience. Comes with short add on rails and there are longer add on rails available. You must change out the stock barrel nut and replace with the one provided. Mounts with six screws and is very stiff and solid when finished. Diameter is quite small but this is what I was looking for. Feels smaller than the Troy Alpha. Worked out great for my kids. Would definitely consider another.

Excellent quality for the price

by

Just received the utg pro today. Put it on And am very pleased with it. I haven't ever felt the Troy alpha rail but I would say it's as good. It feels and looks awesome. As always very fast shipping. Thanks pa

Underrated!

by

I purchased this rail for a Smith and Wesson M&P 15. I am a LEO and have been shooting competitively since I was 14. This is one of the best rails I have ever used (after 560 rounds). It states it weighs 12.5 oz. but I weighed it at 11.8oz. This is lighter than most rails out there. It is extremely slim and makes aquiring multiple targets a breeze. Combined with the right muzzle break there is no reason for even a top 3 gun competitor to consider another rail. I am impressed with UTG PRO and best of all it is made in the USA.

Great free float

by

Love this rail, fit and finish was good. I know everyone may have a hard time getting passed the UTG name. But they hit a home run with this one. Only thing missing is the quick connect for sling. Easy to mount and understand how to get it to lineup correctly.

UTG 4/15 superslim handguards

by

These are my favorite slim free float rails. The mid length over a carbine length gas block or a rifle length over a mid length gas block make a super clean AR setup. I have also used the carbine length with the UTG four rail gas block for a lightweight carbine that really points quick and has a clean appearance. The barrel nut setup makes installation much quicker and easier than the others I have used. There is no gas tube alignment difficulties, and they are American made.