Luth AR MBA-1 Modular Buttstock Assembly - Fixed Rifle Length - AR-15 or AR-10 - Black

A little disappointed that I had to modify the top forward edge so the charging handle would clear it. The stock functions well but I would not call it light. The adjustable cheek piece is wasted on a standard height AR mount but I am using a riser so I did move it up a little. Length adjustment is great. Now if Aero precision would just make a two inch high scope mount to go with it.

A versatile, well designed and well manufactured adjustable buttstock. Gives you exactly what you need at a very nice price. You can spend more but I don't think you get any more value!!

Great adjustable stock. Quality product and keeps overall weight down.

Hi I ordered a Luth-AR Stock, and shipping was fast, as always PA is the BEST, the stock is really nice and quality is the same as any Magpul Prs and also light weight.Thanks.

I'm using this on an AR10 setup for precision shooting. This stock is perfect, and $100+ cheaper than the Magpul PRS. You must run the cheek riser back a couple spaces to make room for the longer charging handle of an AR10, but other than that it's perfect on mine. Collapsed, the length of pull from the butt to the trigger is 15 inches. That's my length of pull, so next time I'll save another $40 and just buy the skeleton version and the check riser.

Luth-AR is pretty much as advertised . . . less expensive, lighter, and nominally more difficult to adjust than a Magpul equivalent, but that's what I was after.Gotta also complement the Primary Arms guys . . . I dropped by the "shop" in Pearland (Houston area) as I was in town and they made sure I got the right model for my weapon of choice. Not only that, but as it was a slow afternoon, they even installed it for me!

Replaced my standard a2 buttstock with the luth ar and wow what an amazing improvement. I wish I had done this to start with. Awesome stock, thanks for the great product.

Well built and good fitment.

Luth buttstock is well worth the money,but you should make it very clear it only fits rifle buffer tubes.l built a new lower so it did not affect me.

Well built and good fitment.

too early to tell...first impressions...nice

Hi I ordered a Luth-AR Stock, and shipping was fast, as always PA is the BEST, the stock is really nice and quality is the same as any Magpul Prs and also light weight.Thanks.

Great adjustable stock. Quality product and keeps overall weight down.

This was a nice addition to my build. It is great quality and by fat one of the best Stocks I've used on my builds. If you are going to purchase this Luth-AR stock or any other Luth stock I highly recommend purchasing the Luth -AR Stubby grip if you shoot righty as it's made for right hand shooters. Top quality! Don't cheap out on your stock by all means.

Cool buttstock, but you MUST HAVE A RIFLE BUFFET TUBE! It will not fir a standard AR15 buffer tube. Sending it back bc I had my buffet tube cericoated to match my lower. Buttstock could have that in the description. Sending back

Bought two of these stocks, one for me and the other for my wife. She like her and I like mine. Many reviews said it need to say it fit only rifle length, but it stated that it replace the A1 and A2 stock, not the carbine. Rifle length=standard length.
<br>
<br>Now for the stock. Very easy to install to the rifle by removing the upper buttplate screw and installation is just as easy, remove the adjustable buttpad by removing the set bolt on the side and just pull out. Put on the tube and may need to "smack" just an tad, install the screw that came with the stock and then reinstall the buttpad. It's very solid and light weight and think it's better then Magpul. Once you get the buttpad and cheek pad set, it's does not need to be messed with again unless an different user is using it.

Just finished a .224 Valkyrie build, haven't shot it yet, but. Really like this stock, I'm 6' tall with a 6'6" wingspan so the extra length on this is nice. Between the stock and Burris P.E.P.R. mount I'm all the way forward on my receiver but without having to have any of the mount on the front rail which makes for a nice solid base.

Awesome quality, regardless of price point.
<br> To those who keep commenting that “they need to specify that it’s not for a ‘regular’ (carbine) buffer tube, you should really learn your terminology if you’re going to be tinkering with firearms. A2 AND A1 BOTH mean “rifle”. Scary to think that you’re handling such potentially dangerous objects yet are so uneducated. Very scary.

Love it!

Have one on a AR15 and a AR10. AR15 no problem what so ever. AR10 charging handle is longer had to mod the cheek piece so that I could fully charge a round. Not a big deal to me but fair warning to those building a AR10 to keep in mind that AR10 charging handles are longer. Always Mod it anyways by installing a swivel stud in the bottom of the stock for my Mono Pod anyways.

There is only a few reasons I am not giving this a five star review but these flaws are enough to sway future purchases.
<br>1. There is no rail on this. The MBA-3 and MBA-4 both have rails to mount monopods too (which are fantastic) and this one was one thing that irked me. It required me to pay an additional $35 bucks for an attachment on something it really should have come with.
<br>2. There was no actual QD sling attachment. I ended up grabbing one from a magpul stock with screw and having to drill it in.
<br>
<br>Besides that, its a great low weight stock.
<br>
<br>That being said- it's leaps and bounds better (and cheaper) than the magpul PRS stocks and jammed with features that are much better for a 1/3 of the price.