Primary Arms SLx 1-8x24 SFP Rifle Scope - Illuminated ACSS Reticle - 5.56 / 5.45 /.308 bundle with Deluxe AR15 Scope Mount

PA1-8X24SFP-ACSS-5.56

Primary Arms SLx 1-8x24 SFP Rifle Scope - Illuminated ACSS Reticle - 5.56 / 5.45 /.308

This Primary Arms rifle scope is part of the SLx optics line. SLx optics have built a reputation for innovation, reliability, and value. All SLx optics undergo rigorous field-testing during development to best serve you in any environment.

The popular 1-6x variable scope now features a total 8x magnification! Look through it and you’ll find the patented ACSS reticle combining bullet drop compensation, wind holds and moving target leads in one easy to use system. The second focal plane design is simple and strong. The ACSS reticle stays the same size regardless of power setting, so you'll need to crank it up to 8x magnification to use its advanced features. This scope is very fast and instinctive from 0 – 300 yards, and very precise from 300-800 yards.

Features:

• Second Focal Plane ACSS reticle calibrated for 5.56/5.45/.308
• Includes manual for zeroing with your caliber
• 1-8x total magnification
• BDC and ranging accurate at highest magnification setting
• Red illumination with 12 brightness settings
• Includes CR2032 battery
• Single piece 6063 aluminum construction
• Water and fog proof
• Fully multicoated lenses
• Lifetime warranty

The brightness knob on the left side of the tube illuminates the center reticle through 12 brightness settings using the included CR2032 battery. This tough scope is waterproof, fog resistant, and covered by the Primary Arms Lifetime Warranty.

PADLXSM

Primary Arms Deluxe AR-15 Scope Mount - 30mm

The Primary Arms Deluxe AR-15 Scope Mount is ideal for M4, AR-15, and similar “flat-top” 1913 Picatinny mounting platforms. Aluminum construction, durable matte black anodized finish. 2.52 inches of clearance between the rings. Places the center of your 30mm tube scope 1.5 inches above the rail. Fits scopes with 30mm tubes. This tough mount features a lifetime warranty.

To make sure that the mount nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, it is recommended no more than 35-40 in-lbs.