Aero Precision AR-15 Enhanced Carbine Buffer Tube
- Mil-Spec dimensions
- Compatible with AR-15 and AR-10 receivers
- Carrier support extensions
- Drain holes at each position
- Ramped tube for stock installation
- Proper thread depth
- Machined from 7075-T6 aluminum
- 6 position
- Made in the U.S.A.
Additionally, the rear of the Mil-Spec buffer tube is ramped to aid in installation of carbine stocks. The proper thread depth prevents the stock from getting stuck when fully collapsed and provides a much cleaner look for your rifle.
Aero Precision takes some of the most state-of-the-art manufacturing techniques and equipment derived from their work in the aerospace industry and applies it to their products in the firearms industry. They have utilized their knowledge from years of building aircraft components to design and engineer AR-15 handguards, receiver sets, scope mounts, and more. They treat every product as if it were a precision flying machine and adhere to strict quality standards to ensure law enforcement, military, and civilian customers receive a product they can rely on.
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Ratings & Reviews
Best tube for the money.
by m -
Beats the pof anti tilt tube hands down. 10$ cheaper, smoother finish and no tool marks to be seen. The ramped end for easier stock install is a nice touch to.
At any price.
by Larry Baker
This buffer tube is the best tube at any price, you can buy a different brand and pay more or less but you can’t buy a better quality engineered buffer tube and that’s bar none and I own many different brands.
by Austin -
The channel made installation and alignment a breeze. Never installed one before and I couldn’t imagine using any different buffer tube. Wouldn’t buy anything else unless you needed something different or specific. Can’t go wrong with this buffer.
Perfect Tube Alignment.
by Stroke -
This is the only buffer tube I will buy. The notch for the buffer retaining pin ensures that your buffer tube is installed perfectly straight and aligned. Turn the tube till the retaining pin snaps in the notch and bingo, your tube is perfectly straight. No need for a special lower vise block to perfectly align the tube and there is no way for the tube to twist or back out even if your castle nut came completely off. That one simple notch makes a huge difference!