Vltor Enhanced Modstock - Mil-Spec - Black

Manufactured by Vltor
SKU: AEB-MB
MPN: AEB-M
Manufactured by Vltor
10 Reviews
$114.26

Out of Stock

For individual Officer, First Responder, and Military pricing please make sure you are logged in. for details

Details

Details

The Enhanced Modstock (EMOD) is about one inch longer than the original Modstock and with the rubber butt plate installed, is about a quarter of an inch longer than the CRANE SCB. The increased length of the EMOD is a major benefit when used on scoped rifles (SPR/DMR), as it increases the available comb for any given length of pull. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. The EMOD was given enough weight to help balance out the normally muzzle heavy feel associated with negative pitch buttstocks. The toe of the buttplate is rolled under; giving the EMOD a superior feel when the weapon is held in the -Inch out of pocket-Inch heads up hold. The buttplate is covered with a removable rubber buttpad that is molded over a metal strike plate. The shape of the buttplate and the rubber buttpad give a solid stock purchase in all situations. 

Features:
  • Mil-Spec dimensions
  • Heavy duty black polymer construction
  • Improved ergonomics
  • Storage compatibility


The Vltor Enhanced Modstock features more storage in the removable, waterproof side compartments; the EMOD holds up to four CR123 or three AA batteries. There is also an additional weather proof compartment in the clubfoot area of the stock, this compartment can be accessed quickly and holds two AA batteries or other small parts. Constructed from the finest materials, the EMOD will stand up to the most rugged demands.
See More

Specifications

BrandVLTOR
ColorBlack
ManufacturerVltor
MaterialPolymer
PlatformAR-15/AR-308
Sling MountQD Swivel Socket - Free Rotation
StorageInternal Storage
TypeCollapsible
Weight14 Oz
California Prop 65 warning

 WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.

Ratings & Reviews

10 reviews

4.9
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews

All the Right Curves in All the Right Places

by

A) Stock locks up tight on the buffer tube. Very tight.B) Lots of storage.C) Beefier stock, balancing out a heavy front end.D) Fantastic cheek weld.E) Longer length of pull than most stocks.

Good purchase

by

All in all I'm satisfied with vltor Emod stock I put it on a Tapco 6 position buffer tube with no problems it was a little heavier than I expected but not so much that I would not buy another one.

Vltor EMOD

by

Awesome stock! I like this better than the ACS. Battery compartment caps are not tethered but they are replaceable. Very comfortable buttpad and cheekweld. And as always, Primary Arms is the best!

Excellent Stock

by

I checked out most of the options on the market and tried quite a few in person. The VLTOR was the only one that had everything I wanted in one product. The right angle on the butt, with the additional angle on the heel of the stock. The storage, the quick release socket, the longer cheek weld, the solid lockup and the rubber base pad.Don't get me wrong, for someone else the list of features may be very different, but for what I wanted the EMOD is ideal. The quality cannot be beat and as always, Primary Arms is tops for speed and quality of service.

excellent stock

by

I ordered this stock and received it next day (as always fast shipping!) Put it on my AR and immediately could tell the difference. I highly recommend this stock.

Vltor Emod

by

Satisfied customer here. Install on my mil spec Colt was a breeze. I'm Lovin the storage capacity, and the great cheek weld the stock provides. I can easily carry enough batteries to cover aon light and eotech plussight more. I can tell the difference in length, but I shoot corner of mouth to charging handle and move my stocks in a click or two usually anyway. Nice rubber butt pad over metal striking plate. Quality construction and really rounded out my rifle. I would recomend.

Noveske AR 15

by

The ultamite hand guard for your Noveske AR 15

Vltor (EMOD) Mil-Spec stock-black

by

good fit, easy install, perfect!

VLTOR EMOD Mil-Spec Stock-Black

by

Great quality replacement stock for your M4 or AR equivalent. The wide stock provides a great cheek weld and the spare compartments to store batteries for gun lights, NVG's, PEQ, etc. is awesome.

Great Stock!

by

I recently purchased one of these and have fallen in love with it. I've ordered two more to replace a magpul stock and a stag arms stock. There is zero play between the buffer tube and the stock itself. It provides a very comfortable cheek weld. The water tight compartments are large enough for me to store 4 batteries for my red dot. I can't say enough about this stock from Vltor. If you plan on ordering one make sure you know the difference between a mil spec and commercial buffer tube and order accordingly. I made that mistake when I first started building rifles.