Bravo Company Manufacturing BCMGUNFIGHTER Compensator MOD 2 - 1/2x28
Manufactured by Bravo Company Manufacturing
Details
Details
The Bravo Company Manufacturing BCMGUNFIGHTER Compensator is built for the 21st-century gunfighter. It's designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure for an overall improved shooting experience. The MOD 2 Compensator has tuned slots and ports that offer maximum recoil mitigation, compensation of muzzle-rise, and flash reduction. With much less side blast and noise than typical compensators, this device is perfect for working in teams in CQB.
Features:
Notice from the manufacturer:
“The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contain not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.
Due to the new and unique design of the BCM compensators, the user may notice small pits on the interior surfaces of the compensator. This is normal. Most designs do not impede the exit flow very much, while the BCM approach is exactly the opposite. These surfaces are specifically designed to operate within the environment found at the muzzle, and are intended to allow significant amounts of deterioration before any loss of performance is seen/felt. These compensators have been tested through many thousands of rounds, and while the wear surfaces may give pause to some users, trust when we say that it's normal.”
Features:
- 1/2x28 Thread Pitch
- Compatible with 5.56 AR-15 Platforms
- Designed with tuned slots and ports
- Nitride treated
- Includes a crush washer
- Recommended to be installed by a qualified armorer
Notice from the manufacturer:
“The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contain not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.
Due to the new and unique design of the BCM compensators, the user may notice small pits on the interior surfaces of the compensator. This is normal. Most designs do not impede the exit flow very much, while the BCM approach is exactly the opposite. These surfaces are specifically designed to operate within the environment found at the muzzle, and are intended to allow significant amounts of deterioration before any loss of performance is seen/felt. These compensators have been tested through many thousands of rounds, and while the wear surfaces may give pause to some users, trust when we say that it's normal.”
Specifications
BrandBravo Company Manufacturing
Caliber Gauge.22 Cal
MaterialSteel
Suppressor MountA2 Mount
Thread Pattern1/2 X 28
TypeCompensator
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Ratings & Reviews
No reviews available
Be the first to