Caldwell Universal Brass Catcher

SKU: 110038
MPN: 110038
7 Reviews

In Stock

NOTE: Limit 5 per household. Quantities exceeding 5 will not allow checkout.

We are fully staffed and processing orders. Standard orders are shipping in approximately 1 business days or less. FFL orders take approximately 20 business days or less if you can provide us an actively receiving FFL location.



An industry leader in shooting products, Caldwell Shooting Supplies has all your range equipment needs covered, from targets and target stands, to rock solid shooting rests. Engineered with innovative designs and steadfast performance, Innovation Defined...Accuracy Anywhere.

The Universal Brass Catcher attaches to bolt-action and semi-auto rifles with durable hook and loop webbing, capturing spent brass as it is ejected. This prevents brass from being scattered around your shooting area, and is the perfect tool for reloaders.

The heat resistant mesh bags can hold up to 100 rounds of spent brass (.223 Rem). Once full, simply unzip the catcher over an appropriate container to collect your spent cartridges without the need to sweep or stoop over to pick up brass by hand.

  • Swing-open design
  • Universal double hook and loop attachment
  • For use with bolt-action and semi-automatic rifles
  • Internal cage design
  • Heat-resistant mesh bag
  • 100 round capacity (.223)
  • Zippered bottom

See More


Caliber GaugeAny
TypeBrass Catcher

WARNING: This Product can expose you to chemicals which is known to state of California to cause Cancer and Reproductive Harm. For more information, see

Ratings & Reviews

7 reviews

  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews

Very universal & makes brass clean-up a breeze !!

by -

Work's great !! mounting is easy on my AR and just as easy on my Ruger semi-auto // keep's the range brass in one place so clean-up is fast & easy the swing-out feature is the big benefit to gain access to any jam or mag problem // make this part of your range gear !!

Great brass catcher !!

by -

works as designed !! fit's my Ruger 10/22 semi-auto & my AR 15 with no issue // great asset for the range // makes clean-up a breeze // the flip open option is the best feature so you have access to the receiver or the mag if their is a problem //

Works as advertised!

by -

This worked great on an AR-308. The mouth covers from behind the brass deflector to the front of the opening where the brass comes out. I have the brass catchers in various sizes, this particular one was awesome for the fact that it swings out for easy malfunction clearing. Likewise the version that slips on a rail mounted holder is a similar size and catches great. The only downside is that it is a nylon net...had a couple of the hot brass suspended from the net...figure I will make a bag out of cotton with a zipper, if the need arises. Super awesome to catch my brass, which I spend a good deal of work preparing...not to leave it on the ground. The retaining straps went in front of my scope mount and held securely enough. The thing did not present any issue causing, I am happy.

Save your brass and keep it looking nice.

by -

Works fantastic, the flip to side feature to actually get in and remove a stuck case without taking the whole brass catcher off is nice, the zipper on bottom to just drop your range brass into your range bag is nice also. All the material seems quality and I expect many years of use out of this. I did have a homemade brass catcher made out of a coat hanger and pantyhose but that brought lots of strange looks at the range, with primary arms prices I couldn't refuse purchasing this and I don't regret it one bit.

Best bang for your buck brass catcher

by -

Works better than the single loop brass catcher Caldwell makes

Almost Perfect


works fine. stays put. deducted one star because the wire frame is wearing holes in the mesh bag at the corners, and I haven't had it a long time. But if the price is right, I'll buy another one and modify it if need be.
<br>It just needs some "padding"between the wire and the mesh.
<br>The flip open feature is a must have on an AR rifle in orde to clear malfunctions, and makes it even handier to get the brass out since the zipper takes two hands to get it open and closed. The other brands are quite a bit more expensive, and I don't think they are that much better. I like it and recommend it as the best bang for the buck.


by -

Update to my review. The product looks better than my current one. Still think it will be prone to wearing holes in the front corners. The back corners have webbing material that looks substantial, but the front corners look to be the same cheap "plastic" mesh. The hot cases stick to it. I have added some webbing to the front on my currtent one. I am happy with the purchase, the retailer, the shipping, and the fact that Primary Arms is located in Texas. I just wish the chinese would stop engineering products so that they don't last very long. They take a good product like this and put some some "soon to fail" feature in it. End of rant. Glad to fine Primary Arms store on the web.