HIPERFIRE HIPERTOUCH Reflex AR-15 Trigger Assembly

The HIPERFIRE HIPERTOUCH Reflex AR-15 Trigger Assembly was designed for the rifle shooting enthusiast. This semi-auto single stage trigger has very short over-travel, features a curved trigger with a backbone, and has a reset you can feel and hear. Completely adjust the pull weight to your preference of 2.5 pounds or 3.5 pounds. The trigger is smooth with virtually no pre-travel or trigger take-up. If you're a fan of John Wick, look for Keanu Reeves running and gunning with this trigger in John Wick 2.

Features:

• Single stage trigger
• Adjustable pull weight
• Curved trigger bow with a backbone
• Clean trigger break
• Short over-travel
• Positive reset
• Made in the U.S.A.

To install, drop in the trigger assembly and align the holes, insert your drift pin into the side of your lower followed by the trigger pin. Pinch the arms of the hammer spring with the hammer attached and place it over the trigger pin. Pushing down and forward, align the holes on the lower, and insert your drift pin using a roll pin hammer as needed. Then follow the drift pin with the hammer pin. The toggle yoke assembly should face upwards and slide into the slot on the pack of the hammer. It should rotate freely in the back of the hammer. Install the toggle springs over the shafts of the yoke assembly. Take the toggle spindle over the top of those shafts, push inwards with a small punch, and drop the assembly slowly down into the hooks of the hammer. Now that you're set, function test the trigger that the trigger is working as well as the safety function of the rifle.

With a 110% money back guarantee, the HIPERTOUCH Reflect Trigger Assembly is the everyman's AR Trigger you'll want to drop into every rifle you own.


HIPERFIRE designs and manufactures firearm accessories with objectively superior performance for the modern sporting rifle. Experience the product of a burning desire to innovate that can only be called a passion.