JP Enterprises Enhanced .308 Extractor - DPMS Pattern
This replacement extractor for DPMS-pattern .308 bolt assemblies includes JP’s extractor spring/rubber core.
Ratings & Reviews
by Gustavo Cornejo
Much needed improvement on my lr308b
Easy website and fast delivery. Would use again.
Worth every penny!
I built a DPMS pattern .308 and everything worked fine at first. After a magazine or two I had constant double feeds and jams. I tried a different buffer and gas block with no improvement. I then installed this extractor and the problems instantly went away.
Fixed Jamming Issues
by Rob -
I bought a new DPMS LR308 Oracle back in 2011. Since the day I got it, it would jam about every 8-10 rounds. Double feeds, stove pipes, it sucked. The rifle shoots sub-MOA, so I thought maybe it was just tight and needed to be broken in. Few hundred rounds later and it couldn't shoot more than 5 rounds without jamming. About 6 months ago I did some research online and found that people having jamming issues switched to this extractor and had no problems. It COMPLETELY fixed the issue for me! The gun runs perfect now. Thank you JP Enterprises!
Solved My Extraction Ejection Problems
by Clinton -
I built a 6.5 Creedmoor AR with a Guntec BCG and was having bad extraction problems. After installing the JP extractor and springs it worked great. Not a single failure to extract or feed the next round. The stock extractor had very weak springs, I was able to push the retaining pin out. I had to tap in the pin with the replacement JP unit, lots more spring pressure. Love this product.