Magpul GL Enhanced Magazine Well for GLOCK G19 Gen3
The Magpul GL Enhanced Magazine Well is designed to enhance and ensure positive magazine insertion for GLOCK pistols. Sleek, ergonomic features ensure minimal printing under clothing for excellent concealment. Optimized for use with standard capacity GLOCK factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions.
NOTE: Some reduced capacity (10-round) factory GLOCK magazines have several dimensional differences which may interfere with this magazine well. Some large aftermarket floorplates may also interfere.
- Compatible with the following GLOCK Gen3 pistols: G19, G23, G32, and G38
- Large ramp area for easier reloading
- External dimensions ensure minimal printing when carrying concealed
- Reinforced polymer construction
- Compatible with Magpul, OEM and most aftermarket magazine floor plates
- Compatible with most aftermarket magazine extensions
- Easy installation
Ratings & Reviews
Did not work with California/ 10 round OEM Magazines
by Derrick -
Full disclosure, I should have fully and thoroughly read the product description a bit more carefully. I did receive a follow up call from (Daryl) Primary Arms support, and they did point out that reduced capacity magazines (such as good ol' California's 10 round max) have fitment issues.
<br>I did run into issues with the OEM Glock Magazines which have thicker baseplates that do not fully seat, loaded or unloaded. PA support was quick and helpful in getting me a return, but CA /buyers with reduced magazine sizes beware.
<br>My G19 factory magazines (for California, reduced to 10 rounds) unfortunately DO not work with this magwell. The square baseplates do not fully fit the tapered walls of the magwell. I suppose you could shave down the magazines to cater to the tapered magwell. These did work fine with the 2 additional Magpul PMAG 10 rounders.
Confirmed does not work with Glock 10rd, but does work with Magpul 10rd mags
by David -
This magazine well DOES NOT work with the factory Glock G19 10rd
<br>For whatever reason it doe not like the factory Glock G19 10rd mag.
<br>However, it does work with:
<br>Glock G19 15Rd
<br>Glock G17 10Rd
<br>Magpul G19 10Rd
<br>Mapgul G17 10Rd
Not worth replacing all your magazines
by Kevin -
Screw wouldn't properly line up with hole in G19 receiver even with HEAVY pressure applied. Went ahead and tightened it down to get screw head flush with grip, elongating frame hole. Then found out NONE of my factory OEM G19 magazines would lock into position! G17 or longer mags (as well as Magpul G19 mags) would work, so plan on replacing all your factory mags with Magpul if you want to use this magazine well.
by James -
I loved this mag well so much that I bought another. Its easy to install, and it really does help with magazine insertion. It also helps get a better grip on the pistol, as an added bonus.