Primary Arms SLx Mag-Tight® Magnification Throw Lever for SLx 1-8x24 FFP Scopes

Details

The greatest advantage of a low-power variable magnification scope is having the capability to both engage close-quarters targets at red dot speeds without sacrificing your ability to reach out and touch targets that might present themselves at extended ranges. Really drive that advantage home with the Primary Arms Mag-Tight® Magnification Lever! Precision machined from lightweight aluminum to perfectly fit our popular SLx 1-8x FFP line of LPVOs, the Mag-Tight® Magnification Lever allows shooters to quickly and confidently shift through their magnification range and even quickly gauge their current setting. Each lever is finished with a tough hardcoat anodized finish to offer a lifetime of service.

Note: Only fits the SLx 1-8x24 FFP

Features:

Lightweight, yet sturdy construction
Precision CNC machined from 6061-T6 aluminum
Extended lever for fast magnification changes
Tough black Type III hardcoat anodized finish
Split ring design for easy installation
Limited Lifetime Warranty

Fitment:

PA-SLX-1-8X24F-GRIF-MIL
PA-SLX8-1-8X24F-RAPTOR-5.56

Back

Specifications

BrandPrimary Arms

Compatible MakePrimary Arms Optics

Compatible ModelSLx 1-8x24 FFP

Optic SeriesPrimary Arms SLx

California Prop 65 warning

WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.

Back

4 stars
0 reviews

3 stars
0 reviews

2 stars
0 reviews

2/4/2025 1:57 pm PA-SLX-ML-01

Have them for all 3x 1-8 Slx that I own

by Daniel -

Pro: This newer one has a tooth that locks into the ribs great and makes it snug.
Con: It's not machined to fit in the middle like the older one they had (personal taste).

It's light and "just long enough". I keep it at a 45 degree angle (left down) at 1x so it is low profile and out of the way. At 8x magnification it is 270 degrees (right top) and that is perfect for my offhand to manipulate with gross motor skills. I presently use grease instead of "threadlock" and controlled semi bursts don't loosen it. This is perfect for my needs.

Was this review helpful?

12/5/2024 5:57 am PA-SLX-ML-01

It works great!

by Brad -

I know it says for the SLX 1-8 and it is but I also use one on my SLX 3-18 FFP and it works great!

Was this review helpful?

11/11/2024 6:08 am PA-SLX-ML-01

great add on

by Bradley -

This throw lever is a great add on! Easy to install and makes using the magnification ring quicker and easier. Just for the heck of it I decided to see if it fits my SLX 3-18FFP and it fits just fine. I'm ordering another one for that scope.

Was this review helpful?

10/7/2024 6:16 pm PA-SLX-ML-01

So much better than factory nub

by Christopher -

Makes changing magnification 10x easier, definitely a worth while upgrade. The second product picture is misleading, the lever should go on the knurling where the factory nub is taken off, not in between the two knurling sections. Probably why the first reviewer thought his was loose/didn’t fit correctly. Great upgrade for any scope!

Was this review helpful?

3/16/2024 9:44 pm PA-SLX-ML-01

Works perfect.

by Brian

Mine fit as intended.
I will mention, you will need to remove the existing small tab on the magnification ring.
A Phillips head jeweler screwdriver fits perfect ( No 1 ) for removal of those screws... mine were snug, so don't use a crappy fitting phillips bit.
Your local hardware store will have a Jewelers screw driver set.... again the No. 1 size .

I will buy more for some of my other SLX 1-8x24 FFP scopes.

Was this review helpful?

10/14/2023 12:23 pm PA-SLX-ML-01

Does not fit

by Spencer -

Lose and wiggles when attached.

Note: We see that we are getting you taken care of on this issue and will get that processed quickly for you.

Was this review helpful?