Scalarworks FUSE/02 30mm - 1.70" Height - Black - Scope Mount

The Scalarworks FUSE/02 is the lightest 30mm bolt-on scope mount available — 5.64 ounces of 7075-T6 aluminum and 4140H steel at 1.70-inch optic center height, with LevelDrive integrated scope leveling, six-screw ring caps, machined inner ring grooves for superior tube traction, and KICK extension mount compatibility for a piggyback red dot, made in the USA.

The Scalarworks FUSE/02 (SW3220) is a 30mm bolt-on scope mount for MIL-STD-1913 Picatinny rails at 1.70-inch optic center height. Materials: 7075-T6 aluminum with 4140H steel hardware, Type III anodized and flash nitride finish. Weight: 160g (5.64 oz). Cant: 0 MOA. Compatible with KICK extension mounts for 12 o'clock piggyback red dot integration. Includes: FUSE/02 mount, 12x #8-40 nylon-patched ring screws, T15 Torx bit, T25 Torx bit, LevelDrive tool, and manual. Made in the USA.

At 5.64 ounces, the FUSE/02 at 1.70-inch height is lighter than comparable 30mm bolt-on mounts from Reptilia, Nightforce, Badger Ordnance, and Geissele — a meaningful weight savings on a precision or duty rifle where every ounce added to the front end affects balance and handling over extended use. The 4140H steel hardware provides the hardness and shear strength at the clamp-to-rail interface that the softer 7075-T6 aluminum cannot, combining the weight advantage of aluminum with the mechanical strength of steel exactly where each material is most needed. LevelDrive is the feature that separates the FUSE from most bolt-on alternatives: rather than relying on bubble levels, plumb bob methods, or estimating reticle level by eye, LevelDrive mechanically indexes the scope's level position during installation using the included tool — a repeatable, tool-assisted process that eliminates the user error and time investment of conventional leveling methods. The asymmetric ring design eliminates the gap at the parting line that standard ring designs leave, providing a more level platform for the scope tube and a cleaner secondary optic surface when a KICK extension mount is installed at the 12 o'clock position. Six screws per ring cap improve clamping force distribution around the scope tube for more uniform retention. Machined inner ring grooves increase traction against the scope tube by reducing the contact patch area, concentrating clamping force for better grip with less torque. The 1.70-inch optic center height provides lower one-third co-witness on AR-15 pattern rifles and accommodates large objective lenses and scopes with deep turret housings that the 1.57-inch height may not clear.

Ring diameter: 30mm. Optic center height: 1.70 inches (SW3220). Weight: 160g / 5.64 oz. Cant: 0 MOA. Materials: 7075-T6 aluminum, 4140H steel hardware. Finish: Type III anodized / flash nitride. Rail: MIL-STD-1913 Picatinny. KICK compatibility: KICK/01 Picatinny, KICK/06 RMR, KICK/07 ACRO, KICK/08 DPP/RMSc. Includes: mount, 12x ring screws, T15 and T25 Torx bits, LevelDrive tool, manual. Made in USA.

Lightest 30mm bolt-on scope mount at this height — 5.64 oz, lighter than Reptilia AUS, Nightforce Ultramount, Badger Condition One, and Geissele Super Precision. LevelDrive mechanically levels the scope during installation without bubble levels or plumb bob methods. Six-screw ring caps and machined inner grooves maximize clamping uniformity and tube traction. KICK extension mounts add a piggyback red dot at the 12 o'clock position without consuming receiver rail space.

The right 30mm bolt-on scope mount for shooters who want the lightest available option with integrated mechanical scope leveling and optional piggyback red dot capability — 5.64 oz, LevelDrive included, KICK-compatible, made in the USA.