Details
Details
Features:
- Heavy Gauge Steel Body
- Steel Floorplates
- Proprietary Anti-Corrosive Coating
- Heat Treated for Added Durability
- Made in Israel
- Used by Israeli Special Forces and Counter-Terror Units
- Compatible with AR10/LR308 Rifles
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.Ratings & Reviews
12 reviews
Great AR10 Mag
by William -
Long OAL mag fits 2.85" coal. Weld is at front right corner which enables longer loads. Shiny finish but very slick. Loads easily and cleans easy. Not anti tilt follower which is good for a straight body mag feeding a tapered case like 308. I've tried ASC, d&h, and cproducts/duramag and this is the overall best of the bunch.
good mag, KAC-mag clone
by Fred -
I initially bought a couple of these to try with my Aero M5 large frame. Works fine, well constructed. Drops free from the mag well when it's supposed to, otherwise stays put just fine. Also worked perfectly fine with a "home-built" (trim router) lower. Used for both 308, and 6.5CM uppers, no issues, no feeding problems. So I went and bought a few more. they've all been fine. I have a few genuine KAC SR-25 mags (very expensive), disassembled them, and I compared them side-by-side, part for part. They are a pretty near exact knock-off copy of the KAC mags, so there's that. The follower's just a little skosh different. Israeli built. They copied the Gold Standard, good results.
Very unreliable
by clayton -
The quality of the mag body is nice but the problem is the follower is too sloppy. It moves side to side and when you fire your second to last round the last round in the mag ejects from mag into the action causing a malfunction every time. I would not recommend for any reason.
Decent Mags
by Another Asian Kevin -
Fit and finish is great. Leveler is kind of unbalanced and gave me a misfeed right off the bat. Make sure to give it a stiff love tap.
Does not drop free in Ruger SFAR.
by Jay
These are some high quality really well made mags. They are very close to the expensive SR25 original mags. My one and only issue is they don't drop free from my Ruger SFAR.
Well made
by Angel -
I bought these because my AR Stoner mags sucked, sratch up and scar my brass and these E-Landers had good reviews on other sights. They are great and well made.
Great value magazine.
by Sgt. T -
2nd steel mag I’ve tried for AR-10/DPMS. No failure to feed malfunctions or empty bolt lock back failures after 200 rounds. Will purchase more of these. 1st steel mags I tried were DuraMagSS 5 rounders. Purchased several. All would not feed. Rounds would get almost side by side in a bind. I think they are too wide (???). Several empty mag bolt lock back failures also. May be uncompatible with my rifle specs. (???). I plan to purchase several more of the E-landers. Be wary of the DuraMagSS.
Wanted to try it out
by Shawn -
I purchased this magazine because I wanted a 20 round magazine for my Tavor 7 and I wanted to see if a steel magazine would work with it. I am glad to say that not only does it work but it works just as good as the Magpul mags I have for it. The price was really good and it feeds great with no issues. Good buy.
Works with Aero M5 with minimal work
by John
The magazines are well made, but would not lock in. Rifle is Aero M5. As another reviewer stated, I had to pry the mag catch out. I used 45 degree needle nose pliers. They have been good since.
Mags that work!
by W. B.
I purchased 4 of these mags all work perfect in a Bushmaster lower with Aero upper. I'm planning on buying more!