Strike Industries Miller 5.56 Compensator - 1/2x28

The Strike Industries Miller Comp is a slim two-chamber compensator built to mitigate recoil like the JCOMP while staying narrow enough for a .750-inch gas block to slide right over it.

Features:

• Two-chamber design that mitigates recoil
• Slim profile fits under a .750-inch minimum diameter gas block
• Matches the host barrel's profile, so the gas block can be mounted or removed without taking off the comp
• Machined from AISI 1144 steel with a black nitride finish
• Threaded 1/2x28 for .223/5.56, about 2.6 inches long and 2.84 ounces
• Includes a jam nut and a 3/32-inch pin, with a pre-drilled pinhole in the comp

It is designed to pair with a 14.5-inch barrel. Pinned and welded on as a permanent muzzle device, it brings the barrel to the 16-inch legal minimum while saving a little weight.

The included jam nut makes installation and timing easier if you are not pinning and welding. Note that the Miller Comp is not compatible with the SI Oppressor blast shield.

The slim 0.745-inch outside diameter is what lets the gas block slip over it, so the barrel nut, gas block, gas tube, and handguard can all be serviced or swapped without removing the device.

Strike Industries designs AR-platform muzzle devices, blast shields, handguards, and accessories, and builds many of its devices to work together, such as its Oppressor blast shields.