Details
Details
Features:
- For optics with 30mm tube diameters
- Machined from aluminum
- Matte black anodized
- Lifetime Warranty
To make sure that the mount nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, they recommend no more than 35-40 in-lbs.
Specifications
California Prop 65 warning
WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.Ratings & Reviews
68 reviews
Everything..
by Alan -
Everything... was good about it, no complaints! Good service!
A lot of extension.
by Tom -
If you shoot nose to charging handle this may be exactly what you need with some scopes.
It’s extended alright!
by Thomas -
This was in the bundle add on list when I bought the SLx 1-6x it barely fits for getting the eyebox/relief right. It’s too much of an extension. It works but I am in the last notch in the upper and my turrets are just off from touching the ring. The standard PA would have worked better or the American made PA GLX mount which as far as extension length is in between the two chinese made ones. The GLx one is about 2 oz lighter to boot. This is solid though, no defects in materials or manufacturing. I am tempted to return it and get the GLx 0 degree mount.
Great Mount
by Robert Wise -
Great mount for the fraction of the price of other brands. Mount is solid and well made
Above Average
by OWEN BROWNER -
It's a solid mount. When mounted correctly there is no wiggle room or possibility of coming loose. Can't ask for better than that. I've gone through literally innumerable ones and this seems to be the one
Great buy
by Buster Lone -
Great scope and mount.
Well made, easy to put on , looks cool and is right on.
May have to get another one.
Have told other people about it and some are already looking to get theirs.
Good design and hold your scope tight
by Steve -
I bought this together with primary arms SLX 1-6X24 scope. It is easy to install and hold the scope tight.
A mount that works
by Dennis Powell -
Gets the job done
Soft Bolts
by RC -
Scope mount is heavy metal but the bolts are very soft and stripped immediately. I use a fat wrench to 5lbs below the recommended in/lbs and both the bolts stripped and my scope was damaged. Never had this problem before as I don't go past the lowest rated torque. Disappointed. Switched to a different brand and didn't have a single issue.
Note: We are happy that we were able to get you taken care of on this issue. Please let us know if we may assist you with anything else.
nice scope mount
by scott -
Easy to put on the rifle snugs up nicely with no wobble. The extension leaves you with good eye relief also. The height of the mount lines up great when cheek is on the rifle butt weld to. I would recommend for the price!