Primary Arms Flip To Side Magnifier Mount - 1.75" Height

Easy and fast to operate, good quality and perfect hight for my EOTech.

I purchased this mount for use with a Barska red dot and 3x magnifier on my DPMS AR-15. Because the Barska magnifier has a wide trim at either end, this mount had to be used because the mounting ring is two separate pieces. Due to the tall height of the red dot (1.75" to center), this mount works perfectly and lines up just right.It does take a little patience and finese to mount the magnifier so that the red dot is in the center magnifier when flipped into place. This is done by adjusting the tension of the mounting screws in the right order. Again, takes a little patience but it can be done.Once in place and adjusted, the mount functions great so far. Nice tight fit in either the side or top positions. A less-expensive alternative to the other higher-priced options.

I used the Flip to Side Mount Tall to attach a Hendsoldt 2.5X surplus magnifier. I added Primary Arms ring inserts to reduce the rings from 30MM to 1" with no issues - the magnifier is exactly centered in my eotech with the built in riser. So pleased it worked without issue right out of the box. The Flip to Side mechanism is secure if not a little tight - but it is brand new and needs to be used a little to break it in. Very satisfied with the quality and ease of use of this mount.

If you have a Sightmark Ultra Shot Reflex sight you will have to order the PA FTS TALL Mount!You will also have to buy the Yankee Hill Machine EOTech Co-Witness Riser Mount to to raise the height of the Sightmark Ultra Shot. This is the only way to get the two to line up correctly as the PA Standard Height Mount is too tall for the Sightmark sight.It puts the magnifier ~5mm above center of the Reflex sight so you can see the top of the frame through the magnifier. You will also need to purchase the YHM-220 Eotech riser for the Sightmark Reflex.The YHM-220 Eotech riser is ~7.7mm tall and the PA FTS TALL mount will raise the magnifier ~2.8mm higher then the standard mount PLUS the ~5mm higher it already sits above the Reflex = ~7.8mm.This brings the magnifier and reflex sight in line.

It mounted easily and lined up perfectly, but it got stuck after one flip. I guess I got a dud.

It wobbles and always comes loose, when shooting its hard to track the reticle because the mount is not stiff...however i have nothing bad to say about the magnifier itself its totally amazing in all aspects just wish you guys offered a mount that had the same quality as the magnifier. I was using the PA3xler model magnifier

Lines up perfect with my eotech, and seems very sturdy. I purchased this with a PA 6x magnifier and love the combo!

Mounted this behind my eotech 517 on a midwest industries quick connect side scope mount on my Romanian AK47 variant. I'm running the UTAC 1.5x-5x variable magnifier in it (which by the way is awesome for the money compared to competitors). This mount is great has a firm steady locking position and does it's job very well. Couldn't be happier.

Nice FTS mount. Has a solid feel to it. Good construction. No wobble or sloppiness whatsoever in the action. Returns the magnifier back to its original setting time after time. If you have the raised base EOTECH on your AR, this is a very good mount at a decent price for your magnifier.

Nice sturdy mount, Flips in and out of position securely with no buttons or levers. Perfect height and alignment for my Eotech 557. Fast Shipping, and Excellent service.