Strike Industries M-LOK Rail Cover - V2 - Black
- Hardened Nylon polymer
- Ultra-slim textured surface
- Non-slip and non-reflective
- Absorbs impact protecting your rail system
- Includes (5) M-LOK panels
Strike Industries products are designed by shooting experts for the shooting sportsman.
Ratings & Reviews
by j dinh
Makes a heck of a difference on the rail
M-LOK Rail Cover - V2 - Black
by Geoffrey Hudson
Nice covers. Thin, easy to install and very understated.
best MLOK rail covers
by Manuel A. Flores
The most low profile and best fitting MLOK rail covers out there. Very comfortable too.
by Will C.
These are a great, minimalist cover for your M-Lok rail, they look great, fit great and give you a sure grip on the rail without being obtrusive.
Cheap and effective.
by Eric Davis
These are as simple as it gets, just snap into an m-lok slot and they add a good amount of traction to the highly slippery m-lok rails. Unlike the magpul panels that are over 1/8th thick these strike panels are super slim and add almost no thickness to the rail. They are kind of hard to remove though requiring some prying from side to side to wiggle them out.
Cheap plastic tabs on back crack/shear off when attempting to insert into M-LOK slot even if you try to pre-bend them before attempting insertion. These definitely do NOT snap in plastic is completely brittle. Out of 5 every one broke the tabs when installing on a Geissele M-LOK rail. Even when they appeared to go in they would just fall off because the retaining tab broke off. Glad I also ordered the Magpul strips those worked perfectly.
Before you install
soak in very warm water!These items must be soaked in very warm water prior to assembly or the locking tab will break! As long as you know this they will install fine just make sure that either side tab is not bent outward during assembly use a wooden tongue depressor and pay attention. After breaking two I learned they look great and are very light! Will buy again.
Purchased 2 sets of these for a total of 10 pieces. 3 of the pieces when attempting to install broke. The inner locking ears snapped right off like a piece of brittle plastic so now my rail has 3 open spots.. Not impressed
I read some reviews here and online that states these were made of brittle hard plastic that easily snapped. Strike industries must have changed the composition of them because the ones I received were very flexible and inserted into the M-Lok holes easily. They add a decent amount of grip to my SLR Solo rail.
Very nice compliment to my Aero Precision Quantum handguard. Very easy install. Very pliable and and easy to snap into place. Contrary to some other reviews these covers are very supple no chance of breaking them during install. I'm not sure if they changed the polymer or what...Buy with confidence!
Plastic is brittle
These look great if you can get them in without the tabs breaking. I managed to get what I wanted installed by carefully squeezing the tabs together and starting at one end but broke 3 in the process. I have an SLR rail so maybe others will have better luck still it wouldn't be a bad idea to have extras.
These do not fit in my rail well at all. I broke 3 of 5 in the first pack I used. Didn't even try the second package. Buy anything else
Best bang for your buck
by GunNut -
Absolutely amazing love it simple to install highly recommend this product
You get what you pay for
You get what you pay for. These are pretty decent if you're looking for something affordable, but they do not provide any sort of grip whatsoever. I thought they had a rubberized texture and were made out of a decent polymer. Unfortunately, they are neither. While they seem to fit mlok slots pretty well, one can tell that they are not very high quality and will wear very easily with repeated installations. Nothing wrong with them, as they are priced well, but definitely not up to the quality I was looking for. I ended up just going with what I wanted in the first place, a set of Railscales.
by Orlando -
I really like these and they are cheap. Overall no issues or real complaints.
by Orlando -
Awesome value, good price, good quality. They do not add bulk if that is what you are looking for, look elsewhere.
<br>Love the look.
Rough Covers that cut into your hands and edges fray lookung white
by joe -
What good are rail covers that cut into your hand and are rough. They are worse than bare M Lok rails without covers. Picatinny covers are made to be comfortable and these are not! Too much BS on texture gripping Blah Blah! Wish someone would just make a smooth cover with no texture or sections like a Bravo Co only with smooth surfaces. They just play to the wanna be spec op fantasy sheepole!. I can grip a smooth surface and they could just rubberize it. Totally uncomfortable to move your hand down the handguard!
Decent product for the price esp. when on sale
by John -
I don't understand why so many reviewers are complaining about broken tabs. I have never experienced this but then I'm no ham-fisting them into place. Be gentle!
<br>A great buy esp. when they are on sale. They offer a little extra "grab" for very little money. If they melt, just replace them. On sale they're a buck each what did you expect?
Does the trick = no tools needed. Extremely light.
by chris -
Surprised at negative reviews on this product. They are just little plastic covers that snap into the M-LOK slots. That's it. They are good enough at the price point they sale for and do not require screws and nuts which just ad weight that is not needed. They stay in place, I have never had any pop out and if I want to add something they pop out fast without any tools needed. Sure you can spend more and get fancier ones but why? These do the job and add maybe a few grams each in overall weight to your build. Strike Industries is a name a trust and their gear is always squared away giving you everything you need but nothing you don't.
Fantastic rail covers - just wish they came in six-packs
by Mr. N -
Great covers for your M-LOK rail - simple, lightweight and they add minimal thickness.
<br>I particularly like the somewhat soft plastic they're made from - a utility knife makes short work of trimming the mounting clips to clear gas blocks and also trimming excess length to get them to butt up against other accessories.
<br>Much like other Strike Industries parts, they deliver the goods at a very competitive price.
<br>My only complaint is the odd number in each pack - I needed six slots covered, so I had to order two packs.
Great product, misplaced item!
by Matt -
These are great, no complaints! Minimalist type cover and cheap is all I needed. ONLY THING IS I got 4 V2 and one V1 cover in the pack of 5. I’m guessing just a packing error?
M-Lok rail covers
by Phil -
I love it! it came in on time and I was able to snap it right in my AR pistol. I love the new look.
by Jaron Curry -
Awesome rail covers Strikes Industries is one of the best companies out there and shout out to Primary Arms for always having great deals, fast shipping and amazing customer service. Will be definitely ordering more from primary arms