B5 Systems BRAVO Mil-Spec Stock - Black
- Reinforced black polymer design
- Steel hardware
- Mil-Spec dimensions for extremely tight fit
- Suregrip stock latch
- Steel anti-rotational QD sling swivel slots
- Fixed sling mount slots
- Enhanced ergonomic cheek weld
- Rubber buttpad
The B5 Bravo Stock is designed for true military spec receiver extension tubes, and fit tightly to eliminate wobble or pinching. On tubes that have been cerakoted or painted, fitment will be even tighter and some break-in time is needed before the stock will adjust more easily.
Ratings & Reviews
B5 Systems SOPMOD BRAVO Milspec Stock
by G. A. Edington
A less expensive and better put together alternative to the standard M-4 stock. The stock rotates your into alignment with the rear sight consistently. I was putting CAA stock saddles on my commercial stocks to do the same thing , but this is a 1/4 pound lighter even with the integral rubber recoil pad. The integral station for a switchable (right left side) detachachable sling swivel is a huge plus too.
B5 systems Bravp Milspec Stock Black
by ken fleming
Awesome product..... Don't hesitate to buy it.
B5 Great stock
Decided to try a b5 sopmod for my noveske lower from P.A. also. Stock is very solid. I've had a colt/Rogers superstoc, moe & magpul ctrs. B5 is my favorite so far. The non rotating QD sockets are a plus. The butt pad and shape shoulders better for me also.
Great ergos but a little loose
First off kudos to Primary Arms for the fast shipping. Purchased a B5 stock over the summer and am very pleased so far. Cheek weld and ergos are great especially the stippling they put on top. Looks cool and has a built in QD attachment. Considering the features and ergos of the B5 Bravo I see no reason to purchase the Magpul MOE stock being offered at the same priceOnly complaint is it's a little wobbly in all directions on my BCM mil spec tube but a few strips of painters tape solved that issue. Had it been a little tighter I would have rated this 5 stars.
I changed my CTR stock to B5 bravo,nice cheek weld,snug fit,looks good and very fast shipping from PA,keep it up!!
nice upgrade nice price
by Roger Perez
I put this SOPMOD BRAVO onto my BCM M4 and I love the way it feels. the cheek weld is nice and it has a nice and snug fit.
Not overly impressed
It works but wobbles. I've tried it on four different rifles and between the four, three different brands of mil spec buffer tubes. It wobbles on all of them. Works well enough that it isn't worth the hassle of sending back but I won't buy any of this model again. The B5 Enhanced is perfect; this, not so much.
Just a very slight wobble. 100x better than the MOE stock I had. Light, good cheek weld, and feels sturdy. Would like to see the price on these come down 15-20$ but worth the price. standard 5 business day delivery if you don't want to spend the extra cash. Order was processed and on it's way in less than 24hrs.
by Scott Y
Looks great, provides much better check weld and locks up tight.
by David M.
Nice fit and finish, works very well with my rifle. Fast and efficient service as well from Primary Arms.
B5 Systems SOPMOD BRAVO Milspec Stock - Black
by Michael C
Nice looking stock only problem is it's a loose fit on the Daniel Defense mil-spec buffer tube I ordered along with it.I contacted Primary arms customer service and was told I could pay to ship the stock back for a store credit.I contacted B5 technical support and they are aware of the problem and a fix will be implemented in 2015 Not wanting to go through the hassle of sending it back I did a temporary fix with a few strips of Black electrical tape on the buffer tube that tightened up the fit and stopped most of the rattling.
Not quite as nice as the SOPMOD, but an excellent stock for the price. Very strong, durable and comfortable. If you want a better cheek weld get the SOPMOD, if that is less important to you than the BRAVO will do just fine.
One of the better M4 type stocks I have ever used. Everything you need and nothing you don't. Well, perhaps some storage space would be nice.
BCM B5 bravo
by Joel Villanueva
PA is an awesome company. Fast shipping and great customer service. The B5 stock replaced my M4stock, it looks and feels great!!
by 6.8 Fan
Perfect fit. No rattle, no lose feel. Eye sits in perfect position with cheek weld.
Great upgrade for shooters
Simple, rugged and reliable. Provides excellent cheek weld and does not break the bank. Highly recommended.
best $58 I've spent in awhile
by Dianne "I'm so fine" Stein
Some complained of a slight wiggle but it feels snug and tight on mil spec tube. Built solid and the recoil pad is much better than my ctr. Nice addition to my "budget" build
Stock is solid and well built. Very nice cheek weld. I decided to go with the bravo instead of the sopmod with the battery storage because I would use a belt and or chest rig to hold my ammo so might as well use it to hold batteries or anything else also. Need ammo to use gun. Primary Arms is top service, they shipped same day within 15 minutes. I will continue to shop here.
by Royce Austin
Swapped out my Magpul CTR for this stock. Far more comfortable in the shoulder which was surprising, and much better cheek weld. Slight wobble on the buffer tube but it doesn't bother me. Will use on future builds. As always great service from PA, order shipped 2 hours after ordering.
by R Taylor
The B5 BRAVO is a high quality stock. Well made and provides very comfortable cheek weld. Good fit on the buffer extension with very little looseness or rattle. Hat's off to Primary Arms! As usual, reasonable prices and fast shipping. A great company to order from.
BRAVO Stock Purchase
by Keith Dooley
The BRAVO stock was shipped and received as promised. No issues, will definitely recommend and buy from Primary Arms again. ~ K Dooley
Simple, lightweight, affordable
by Jason Andrews
This is an excellent stock! It is lightweight and simple to maneuver - I would definitely recommend to a friend!
by Adrian Noble
Tight fit, no wobble, and great finish. Will buy again.
by Jason Watson
Wanted to try something a little different than what I normally use (Magpul CTR) on a 300BLK I'm putting together. The Bravo is a nice change in that it provides a little better cheek weld while having a slightly smaller side profile. My 300 is an SBR, and a smaller profile without going to a compact stock is what I wanted. I'd buy another. I pick up my orders in store and from the very first visit I've been treated like an old friend every time I walk in the door.
B5 Systems Bravo stock
In the process of building an at. B5 stock was a nice fit and Primary Arms was easy to work with and the order processed and shipped quickly.