Troy Industries Battlemag for AR-15 - 30 Round Capacity - Black Polymer

Manufactured by Troy Industries
SKU: SMAG-SIN-00BT-00
MPN: SMAG-SIN-00BT-00
Manufactured by Troy Industries
34 Reviews
$10.99

Out of Stock

NOTE: Limit 5 per household. Quantities exceeding 5 will not allow checkout.

Magazines considered High Capacity are controlled by the ATF and/or local jurisdictions are not available for purchase/shipment in all areas.

Details

Details

The Troy BattleMag is engineered to function flawlessly with all M4, M16/AR-15, HK416 and FN SCAR rifles and carbines. An aggressive scale pattern provides the ultimate magazine grip in dirty or wet conditions. A bolstered floor plate is set flush to eliminate the BattleMag from catching on other magazines or creating unnecessary bulk when stacked or pulled from a pouch. An extended floor plate lock is also included, which helps absorb shock when the magazine is dropped free during a reload. The reinforced feed lips and anti-tilt follower do not require a clamp to keep the feed lips from spreading when kept loaded for extended periods of time. Made from improved Troy proprietary military-grade, chemical, biological and impact resistant polymer and extensively tested by Special Ops units. Extra mags are always nice to have and you can't go wrong with a collection of Troy Battlemags.


Features:
  • Includes extended floor plate lock
  • Reinforced feed lips and anti-tilt follower
  • Durable impact resistant polymer with aggressive texture
  • Bolstered floor plate
  • Compatible with .223 Remington and 5.56 NATO

Troy Industries is the choice of professionals the world over. Made in the U.S.A., Troy products are reliable, innovative, and made from the finest quality materials. When lives are on the line, you can count on Troy Industries.
See More

Specifications

BrandTroy Industries
Caliber Gauge5.56 NATO
Magazine Capacity30
Manufacturer.Troy Industries
PlatformAR-15 Magazines

WARNING: This Product can expose you to chemicals which is known to state of California to cause Cancer and Reproductive Harm. For more information, see www.p65warnings.ca.gov

Good Magazine

by

Does what it is supposed to well, and looks good doing it. What more can you ask?

Troy 30 round Battle Mag

by

Great magazines, function flawlessly, work well in 3 different AR's, love the feel and grip. I have Magpul's, Troy's and ProMag's and can honestly say they all work fine. No issues.

Never let down

by

No matter what I buy from primary arms from optitics to these magazines everything is superior quality and customer service is amazing. If it isn't on primaryarms.com you don't need it, period.

Hard to Beat

by

Well built, a great price and great service. I barely stopped typing before they showed up at my front door.

Decent mag, not the best.

by -

Decent mags, feel a little cheaper than my Hexmags and Pmags and can be tighter in some magwells as well. I would recommend them, but would recommend getting hexmags or pmags on sale first.

Great magazine

by -

Functions like they're supposed to. Well placed grip patterns are a nice touch. The additional floor-plate/rubber plug makes for easier retrieval from a tight mag pouch.

well built but......

by

I bought five of these magazines on sale and they are well built; however they all seem to have a hard time staying in my mag well. my magpul lancers and GI mags do not have this problem. If they would stay they would be great.

great mags

by

these mags run flawless. they are durable as all hell. for the guy who says he can't get them to seat in the magwell slap them in don't baby them mags are meant to be seated with the bolt open but obviously you can seat them with the bolt closed but you know you gotta slap them in these are tools not fine china.

Troy battle magazines

by

Very nice definitely in the top 3 out there. When on sale at 1/2 price ($7.99ea) buy as many as you can. Thanks Primary Arms.

Good reliable mags

by

These are nice mags. When there on sale buy as many as you can

Troy Battlemag-Will Get The Job Done

by

They work just as they are suppose to...however I am not thrilled about the fitting (hint the 4 star). When properly mounted in the magazine well they move back and forth alot more than I want for a battle mag. So for battle set ups it's back to the Magpul's but practice/training Troy's will do just fine!

Great magazines !

by

My favorite magazines! Drops free everytime in all my rifles. Functions flawlessly. Magpul, Hex, Amend 2 magazines don't always drop free. Can't go wrong with Troy or Primary arms!

Worst feed ammo

by -

I agree the magazine fits in the reciever fine but ammo keeps jamming up and wont feed. I do not have this problem with any other magazine but one of these (I ordered two but only tried one so far). Jammed up because it looks like the follower does not keep the ammo at the correct angle so it wont work at all with more than 20 reds in it.

Bad bases

by -

Bought 3 of these to try out will not buy again the tabs on base broke when I was adding the pull piece only broke on 2 but will stick with pmags

You get what you pay for.

by -

You get what you pay for with these. They feel noticably weaker than most other polymer magazines, almost like they are made out of the same ABS that toys are made from. If you try to install the pull tabs that protrude from the bottom plate, you are almost certain to break the locking ears off to get them off unless you are painstakingly careful. Once these break, your mag is totaled. Stick to standard aluminum mags if you are that hard up for cash. Or pay the extra money for the proven Magpul PMAGs or Daniel Defense polymer mags. These are pretty much disposeable.

Excellent mags for your AR and double pouches. Feed and Fit Well!

by -

Great mags, Double up nicely in mag pouches. Seat well when SMACKED! and always drop free. I've used them in several different rifles with the same results.

Cheap plastic mags

by -

Cheap plastic mags. The side is shiny and slick poor design floor plates tabs will break.
<br>Side by side with Magpul no contest.
<br>I will give a long thought before I purchase another Troy product.

Garbage

by

These mags are junk. If you attempt to remove the base plate you will most likely destroy the retaining tabs that hold the base plate on. The plastic is extremely soft. I assumed that since Troy is a quality parts manufacturer, these would be decent mags. I was very wrong.

Cheap for a reason..lesson learned

by -

Ordered 4 of these just cause they were on sale. Opener one and went to switch out the floor plate for the grab tab just to see if I liked it. Putting it back together and the tabs that lock into the magazine body broke clean off. I'll stick with pmags.

Troy,what were you thinking?try again

by -

Decent.loads and feeds fairly smoothly,reliable.nice visible blue follower.mag body is slippery despite narrow band of texture on corners.
<br>Baseplate designed by a moron.if you disassemble to maintain or swap flat floor plate for included pull tab you will likely break the tiny idiotic locking tabs used to secure it and good luck getting it back together.just a stuipid design that ruins an otherwise good mag.ok for plinking or target practice.i wont trust with my life. I got on sale for $6 ea.otherwise id return.stick to Pmags,Lancer,G.I.mags

We've been impressed

by -

I'm surprised by the negative reviews. We've been running these almost exclusively for 556 since around 2012; maybe longer. We have over 50 of these in rotation and have not had any magazine related failures to the best of my knowledge. I don't think we've had any magazines break either because we're still running mags from the original batch. They ran 300blk perfectly too when we used them for that. We've since switched to lancer for 300blk to avoid loading incorrect ammo. My favorite thing about the battlemags is how easy they stack and pull from punches. The ones we have hold 31 or 32 rounds if you cram them in, so with the appropriate 30 rounds they easily load with a closed bolt. Maybe they've changed things in the last year or two but the ones we have are great. Just thought I'd share our experience.

BAttlemags

by -

Used them on my 300 and worked just fine. Would def buy again. Shipping on this order was kind of slow, but not Primarys fault. Items ordered from Virginia but went to California before heading east.

No Issues good magazines

by -

I purchased 2 of these last November 2016 from PA and have been using them on and off for over a year now with no issues. I've kept them loaded for around 6 months and did not have any issues after that either. Overall they seem to be reliable and decently constructed. I haven't attempted to replace the base plate so I can't speak to that. I consider these good range mag's and stop short at calling them battle mags as there are plenty of other higher quality mags that I would consider for that. I have not had any failures with these magazines including bolt hold open. Great deal for the cost!

Decent mags

by -

No problems with them in 3 different AR's..A little loose in the Spikes lower, but it doesn't effect function. They seem fairly durable, although made from a little thinner material than Magpul, but should hold up just fine for plinking and target practice. I didn't try replacing the bottom, so can't speak to that..Caught them on sale for six bucks, so I stocked up, and I'm happy with them..Will buy more if I catch them on sale again..If they're not on sale, I'd throw in a couple more bucks and get P-Mags.

Over 10 in use and zero issues.

by

Looks like all the negative reviews are from people who broke them switching base plates. I have switched them out on all of mine without ever breaking one, so it is 100% user error causing this. Great mags that work and are cheap right now.