JP Enterprises EZ Trigger System with Armageddon Gear Revolution Roller Trigger - .154"

SKU: JPFCP-1EZ-R
MPN: JPFCP-1EZ-R
Manufactured by JP Enterprises
6 Reviews

$227.95

Out of Stock

NOTE: Limit 5 per household. Quantities exceeding 5 will not allow checkout.

$227.95

Out of Stock

Details

The JP Enterprises EZ Trigger system is the benchmark for all single-stage AR-15 triggers in terms of precision, reliability, durability, safety, and longevity. The yellow/yellow combination may be used for competition and various recreational applications with hand loads or domestic-manufactured, non-military ammunition. It will result in a release weight in the 3.0-3.5 lb. range on most receivers.This easy to install system, fully compatible with both AR-15 and AR-10 platforms, provides clean, precise, and consistent breaks, short resets, and adjustable over-travel to make sure you have the best trigger possible!

Specifications

AdjustableAdjustable
BrandJP Enterprises
Drop InStandard Assembly
Manufacturer.JP Enterprises
PlatformAR-15/AR-308
Total Pull Weight3.0 lbs - 3.5 lbs
Trigger BowFlat
Trigger Pin DiameterMIL-SPEC .154
Trigger StyleSingle Stage

WARNING: This Product can expose you to chemicals which is known to state of California to cause Cancer and Reproductive Harm. For more information, see www.p65warnings.ca.gov

Ratings & Reviews

6 reviews

4.7
  • 4 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews

Up there with the best

by

I thought I made a review for this trigger already... Must have been too busy trying to get to the range to have hit "submit." Well even better. I purchased this trigger from Primary March of 2015 and installed it in a 3 gun/DMR set up. I have a hard time understanding how this trigger has not had more traction in the market. Could be a couple things. It's not a "drop in" meaning you'd either have to have a fundamental understanding of how an ar trigger works on a difficulty scale of 1-10 (ten being gunsmith) this is really only about a 3 you just need to take your time to figure out how to make it work for YOU. My trigger is set with nearly zero over travel zero creep and the reset is incredible. When you add in the roller trigger function you may have the best trigger on the market for ARs and I picture this type of trigger being used across the board in precision shooting down the road.. it is that good. It is nearly impossible to push or pull the shot with this trigger. Even a year later. We'll see after about 5k rounds if there are issues with the bearings etc... but for now it works great. I can only think of one reason it's not that taken off in popularity yet... JP doesn't spend much on marketing they just compete... Don't be scared. Buy it... yes over a geissele cmcs even the gold if you have a fun competition gun you're building... you won't regret it!

Not worth the money

by

CONS- You HAVE to use the JPs selector with this trigger. That means if you want ambi capability you have to purchase the lever, Adding $20. -lots of screws. 4 screws (2 in the trigger, 2 in he safety). As an armorer I see potential for constant maintainence. Yes I stripped the parts and screws with degreaser and used loctite. However the more parts you have the greater the probability for maintainence. - the trigger has only one spring option with an AR10. Which only yields a 4 pound pull. - I haven't done a lot testing (shot 250 rounds)but in my opinion I wouldn't use this trigger for duty. RTT PROS- thick, large trigger surface. - over travel adjustment works well.Overall I can't recommend this trigger. For the money you can purchase a Geissele. Im just not sold on the long term reliability of a trigger with so many moving parts. Out

Fan-F$#@ing-Tastic

by

I decided to build a 3gun/dmr style rifle this past year and having experience with timney, cmc, geiselle and of course milspec triggers, this set from JP piqued my curiosity. JP has a reputation for building fantastic components and this is no exception. The build quality and tolerances are excellent. The function is clearly different, and the install is harder than a "drop in" or milspec kit. BUT this in itself makes it a better component. You fine tune this kit to your lower, and to your preferences. I have absolutely taken all of the reset and all of the creep out of my trigger and the bearing trigger takes all side pull/push out of the trigger. While I wouldn't put this in a "combat" build, for competition use this may be one, if not the best kits out there.

Best trigger on the market

by

I can honestly say this trigger is hands down the vest trigger you can get. It is fully adjustable, comes with a spring kit to use what ever configuration you desire. It feels amazing with a very crisp break. And the rolling trigger is a very natural and comfortable feel

Great purchase experience

by

I recently ordered a JP EZ Trigger directly from JP. They let me know that they were out of stock but that one of their online vendors had one available. I contacted that vendor but apparently in the 30 minutes between receipt of the email from JP and when I checked the website, they were sold out. JP said to try PrimaryArms.com, so I did. Webpage said "in stock" and I emailed to confirm. David physically checked the stock and confirmed, so I ordered and it showed up a few days later. Excellent customer service and I've found that fulfillment to "shipped" status is extremely quick--often same-day if you order early enough or next-day if you order the night before. I've been very pleased so far!As for the trigger itself, I am in the process of installing it. As a newbie builder I'm probably taking longer than I should, but it appears to be high quality with tight tolerances and, hopefully, will work as advertised.

Great trigger, easy install, smaller groups!

by

Ordered the jp roller after much research and being skeptical that it was a gimmick. I installed it in a barnes precision ar lower. The trigger assembly did not drop in as the lower is too tight or trigger too wide. After about 15 minutes of sanding down the trigger it dropped right in install was easy! Ran a couple hundred rounds thru it, crisp breaks, light pull, very little reset. Put the gun on a bag and my groups went from 1.25" to sub .5" at 100 yds! Great buy!!